Estimating Coordinates Transformation Parameters from Global to Local Coordinates Systems in Lebanese Republic Based on Zonal Division

  • سال انتشار: 1404
  • محل انتشار: ماهنامه بین المللی مهندسی، دوره: 38، شماره: 4
  • کد COI اختصاصی: JR_IJE-38-4_011
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 83
دانلود فایل این مقاله

نویسندگان

M. Gazizovich Mustafin

Engineering Geodesy Department, Civil Engineering Faculty, Saint-Petersburg Mining University, Saint Petersburg, Russia

M. Nasrullah

Engineering Geodesy Department, Civil Engineering Faculty, Saint-Petersburg Mining University, Saint Petersburg, Russia

چکیده

The widespread use of Global Navigation Satellite Systems (GNSS) in geodesy necessitates the transformation of coordinates from global to national systems, a process that can introduce spatial errors. This research focuses on evaluating the accuracy of coordinate transformations to the national coordinate system of Lebanon, which uses the double stereographic projection on the CLARKE ۱۸۸۰ ellipsoid. Specifically, the study examines the horizontal plane accuracy of this transformation process. The Lebanese map was divided into five zones for this study. Transformation parameters were generated for each zone by combining International Terrestrial Reference Frame (ITRF) ۲۰۱۴ coordinates (obtained using an online precise point positioning service) with CLARKE ۱۸۸۰ coordinates calculated from known geodetic coordinates. The newly calculated parameters were then tested against the adopted parameters using ۳۹ check points, and positional errors in the horizontal plane were analyzed. Additionally, the inverse distance weight method was employed to interpolate transformation parameters at the boundaries between zones. The applied method significantly reduced positional errors in projected coordinates at most check points. Furthermore, the successful application of the inverse distance weight method for interpolation proved effective in minimizing positional discrepancies when transforming coordinates in areas located along zone boundaries.

کلیدواژه ها

Coordinates transformation, Global Navigation Satellite Systems, Transformation Parameters, Precise Point Positioning

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.