Improvement Uniformity of Coating Thickness for Hot-Dip Galvanized Steel Strips
- سال انتشار: 1390
- محل انتشار: دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
- کد COI اختصاصی: ICME12_393
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1350
نویسندگان
Department of Materials Engineering, Isfahan University of Technology, Isfahan
Department of Materials Engineering, Isfahan University of Technology, Isfahan
Department of Materials Engineering, Isfahan University of Technology, Isfahan
چکیده
In present research work, effects of some production parameters such as zinc bath temperature and air knife height on uniformity and structure of hot-dip galvanized coating produced in Mobarakeh Steel Company was studied. The thickness of intermetallic layers was determined by Optical Microscopy. In order to check the thickness of coating and alloying elements distribution through the coating thickness, X-Ray Mapping and GDOES analysis were employed. In order to investigate the uniformity of coating thickness, zinc coating firstly removed and its mass was measured, and then the coating thickness diagrams were plotted. Results showed that by increasing zinc bath temperature the fluidity of the molten zinc increased and the coating uniformity improved. Also, in lower speeds, by increasing the air knife height, when the strip passed through the air knife, coating temperature decreased and caused increasing in the coating liquid viscosity obviously. Thus the thickness of coating increased and reduction of coating uniformity happened. In higher speeds, by decreasing the air knife height, direct air collision to the surface of molten bath occurs resulting in coating uniformity decrease. Therefore in order to increase the coating uniformity, the height of air knife should be optimized.کلیدواژه ها
Air knife height; Coating uniformity; Hot dip galvanizing; Zinc bath temperatureمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.