DYNAMIC ANALYSIS RC STRUCTURAL WALLSYSTEMS USING BOUNDARY ELEMENT

سال انتشار: 1403
محل انتشار: دومین کنفرانس بین المللی تحقیقات پیشرفته در مهندسی عمران، معماری و شهرسازی
کد COI اختصاصی: ICARCAU02_087
زبان مقاله: انگلیسی
تعداد مشاهده: 39

دانلود فایل این مقاله

نویسندگان

Fatima MajidiFar

Faculty of Civil Engineering, Shahid University, Iran

Hamid Moslemi

Associate Professor, Faculty of Civil Engineering, Shahid University ,Iran

Seyyed Mojtaba Mousavi

Faculty of Geotechnics Engineering , Iran,

چکیده

The dual RC wall-frame system has been a popular choice as a structural system formedium to high-rise buildings in earthquake-prone areas due to the enhancement ofoverall strength, stiffness, and ductile response, as compared to an RC frame building.The T-shaped flanged RC structural wall is widely used in such dual systems, and itexhibits different responses in terms of strength, stiffness, and ductility in case ofreversible loading applied parallel to the web. The same has been substantiated by pastexperimental studies. In the present study, one T-shaped RC structural wall (T۱) isdesigned and detailed according to the conventional procedure. The second T-shapedRC structural wall (T۲) is considered with increased horizontal length of the boundaryelement, as well as increased thickness (enlargement) of the boundary element, both atthe tip of the web. Numerical simulation is performed for both of these configurationsusing the computational platform ABAQUS V۶.۱۴. The Concrete Damage Plasticity(CDP) model is used as the plasticity-based continuum damage model for concrete.From the results, it is also found that the lateral load capacity of T۲ is higher for boththe bending modes. Regarding ultimate drift, the T۲ configuration exhibits higherultimate drift for both web parallel flange-in-tension and web-in-tension bending modesirrespective of reinforcement types. Also, a significant improvement in displacementductility capacity is observed for the T۲ configuration as compared to the T۱configuration, especially for the web parallel flange-in-tension bending mode. Thus, thepresent study indicates the influence of enlarged boundary elements on the seismicbehavior of slender T-shaped RC structural walls.

کلیدواژه ها

dynamic analysis, wall-frame, Abaqus, RC structural, T-shaped flanged

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.