A New Sub-Threshold 7T SRAM Cell Design with Capability of Bit-Interleaving in 90 nm CMOS

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,141

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICEE21_531

تاریخ نمایه سازی: 27 مرداد 1392

چکیده مقاله:

In this paper we present a new Static Random Access Memory (SRAM) that has 7 transistors in each cell. This idea allows for bit-interleaving that makes the SRAMmore reliable against the soft errors. One of the challenges of a conventional 6 transistor (6T) SRAM cell in sub-thresholdregion is sizing of its access transistors. Here by separatingaccess transistors of reading and writing, we mitigate this challenge. By using a minimum-size access transistor forreading, probability of unsuccessful read reduces. To have a more successful write operation, we make one of the invertersof the cell that is fighting with the write access transistor, weaker during write operation by floating its supply voltage and ground rails. After write operation, this inverter returns back to normal mode. Simulation results in 90 nm CMOS technology show that our design satisfies 4.5-sigma criterionfor reading and writing at supply voltage of 300 mV. Compared to conventional 6T SRAM cell, our design improves read-time and write-time significantly. For exampleat supply voltage of 500 mV, these improvements are 137 and 83 percents, respectively. Comparing power and energyconsumption for single write operation of the proposed 7T SRAM cell at supply voltage of 300mV with conventional 6T SRAM cell at 800mV (i.e. minimum achievable voltage for this SRAM cell) shows improvements of 133.4X and 266.78X, respectively.

نویسندگان