Hydro-Thermal Performance Evaluation of Nanofluids Flow in Double Pipe Heat Exchanger: Effects of Inner Pipe Cross Section, Circular or Cam-Shaped

  • سال انتشار: 1400
  • محل انتشار: مجله تحقیقات انتقال حرارت و توده، دوره: 8، شماره: 2
  • کد COI اختصاصی: JR_JHMTR-8-2_011
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 124
دانلود فایل این مقاله

نویسندگان

Aso Rezaei

Department of Mechanical Engineering, Tafresh University, Tafresh, Iran

Zahra Baniamerian

Department of Mechanical Engineering, Tafresh University, Tafresh, Iran

چکیده

This study investigates numerically the hydro-thermal behavior of nanofluids in double-pipe heat exchangers with two different cross-sections using four different nanofluids. Two types of different circular and cam-shaped cross-sections, four types of different nanofluid of various concentrations are assessed. The results show that cam-shaped cross-section has reduced the heat transfer rate and the pressure drop compared to the circular cross-section. The heat transfer rate has been increased in both types of heat exchanger by increasing the concentration of nanoparticles, but the pressure drop and friction coefficient has been increased compared to pure water. The results of investigating energy ratio show that the highest performance evaluation criterion (PEC) is related to the silver nanoparticles and the energy ratio (PR) increases by increasing the percentage of nanoparticle concentration. But the energy ratio has been decreased for other nanoparticles by increasing the volume percentage of nanoparticles. The results of thermal and hydraulic studies show that the highest PR value is related to water/TiO۲ nanofluid and cam pipes have a higher energy loss. Maximum heat transfer improvement for circular pipes is ۲۶.۷۴% related to Ag nanoparticles while this value is ۲۱.۱۵% for cam-shaped pipes.

کلیدواژه ها

Double-pipe heat exchanger, Cam-shape cross-section, Nanofluid, heat transfer coefficient, Pressure drop, Energy ratio (PEC and PR)

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.