FRP Retrofitting of Reinforced Concrete Beam-Column Joints
- سال انتشار: 1391
- محل انتشار: چهارمین کنفرانس بین المللی مقاوم سازی
- کد COI اختصاصی: ICCT04_053
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1286
نویسندگان
۱Graduate student in MSc, Yazd University, Yazd, Iran
PhD Candidate, The University of Queensland, Brisbane, Australia
Senior lectures, The University of Queensland, Brisbane, Australia Institute/Company
چکیده
Fibre reinforced polymer (FRP) has been widely used for retrofitting/upgrading of reinforced concrete joints. The efficiency of this composite system in enhancing the performance of deficient RC joints has been proven in past studies. Relocating plastic hinge from the column face toward the beam is accounted as one of the most effective methods for upgrading of RC beam-column joints which could prevent the formation of undesirable weak-column strong-beams mechanism. This study is conducted in order to investigate the effectiveness of FRP retrofits in improving the performance of the beam to column joints through the relocation of plastic hinges away from the beam-column connections. The studied joints are selected from the RC frames designed based on intermediate ductility levels. The well-known finite element software, ANSYS, is employed to carry out the nonlinear finite element analysis. Different configurations of FRP application including a novel configuration at beam-column joints are assessed and the efficiency of each composite architecture in relocating the plastic hinge is discussed. The parameters studied for each technique are the thickness of FRP and the length of FRP. The results show that the proposed configuration is not only capable of relocating plastic hinges and improving the load carrying capacity of the joints but also prevents the premature failure of de-bonding. The latter also has been proven by the experimental testsکلیدواژه ها
FE analysis, FRP, RC joint, plastic hingeمقالات مرتبط جدید
- بررسی اثر پارامترهای محیطی (دما، رطوبت) بر داده های پایش سلامت پل های فولادی
- بررسی تاثیر نوع ساینده بر تاول اسمزی پوشش بر پایه اپوکسی بر سطوح فولای آلیاژ کربن در محیط غوطه ور
- مدل اجزای محدود برای ارزیابی تاثیر خروج از مرکزیت بر ظرفیت ورق های پیوستگی در ستون های H شکل
- ارزیابی احتمالاتی قاب خمشی فولادی بر پایه فولاد St۳۷ و St۵۲ تحت زلزله های نزدیک گسل
- خرابی پیشرونده لرزه ای قاب خمشی فولادی ویژه بلند مرتبه مهاربندی شده در برابر زلزله نزدیک گسل
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.