Mitigating Corrosion Probability in Systems by Addressing Bubble Hydrodynamic Behavior During the Condensation Process
- سال انتشار: 1403
- محل انتشار: سی و دومین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران
- کد COI اختصاصی: ISME32_034
- زبان مقاله: انگلیسی
- تعداد مشاهده: 214
نویسندگان
Department of Mechanical Engineering, Tarbiat Modares University, Tehran- Department of Mechanical Engineering, Tarbiat Modares University, Tehran
Department of Mechanical Engineering, Tarbiat Modares University, Tehran
چکیده
The effect of contact angle, phase change process, and channel’s inclination angle on hydrodynamic behavior of bubble were investigated. For this purpose, transient flow along with a two-dimensional channel, was used. Moreover, VOF approach was used to simulate multiphase flow in the channel. Besides that, Lee model is mass transfer model that is utilized in current research. Results showed that increasing inclination angle of the channel has negative effect on the time which bubble quits the fluid’s media. In other words, due to reducing the velocity of flow, the exit time increased, in spite of increasing pressure gradient force. Furthermore, results showed that the exit time of bubble in presence of condensation process is slightly lower than the condition without presence of condensation process. This is owing to the reduction of the bubble's mass caused by the phase change. Last but not least, using hydrophobic walls in channel is worse than using hydrophilic surfaces due to corrosion considerations.کلیدواژه ها
Condensation, Hydrodynamic behavior of bubble, Corrosion, Exit time, Inclination angleمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.