Experimental Investigation of Nozzle Temperature Effect on Tensile Strength of PLA Material in FDM Processes with a Nozzle Diameter of ۰.۶ mm
- سال انتشار: 1402
- محل انتشار: بیستمین همایش ملی و نهمین کنفرانس بین المللی مهندسی ساخت و تولید ایران
- کد COI اختصاصی: ICME20_066
- زبان مقاله: انگلیسی
- تعداد مشاهده: 163
نویسندگان
Master of Science, Manufacturing Group, Faculty of Mechanic, Tabriz university
professor, Manufacturing Group, Faculty of Mechanic, Tabriz university, Tabriz
assistant professor, Manufacturing Group, Faculty of Mechanic, Arak university
چکیده
The fused deposition modeling (FDM) process is the most widely used additive manufacturing and ۳D printing method. One of the most important challenges of the FDM process is the strong dependence of mechanical and physical properties on printing parameters. The purpose of this research is to investigate the effect of the basic printing parameter of nozzle temperature (at three temperatures of ۱۹۰, ۲۰۰ and ۲۱۰ degrees Celsius) with a nozzle diameter of ۰.۶ mm on tensile strength. Examining the results of the tensile strength of the samples showed that with a change of ۲۰ degrees Celsius in the temperature of the nozzle, the tensile strength can change by ۵-۱۰% (from ۳۲.۱ MPa to ۳۸.۱ MPa). The highest tensile strength corresponds to the temperature of ۲۱۰ degrees and the lowest tensile strength corresponds to the temperature of ۱۹۰ degrees. Also, the scanning electron microscope images of the fracture surface of the printed samples showed that all the printed samples have micro-holes at the interface between the layers, and removing these micro-holes is inevitable due to the nature of FDM ۳D printing.کلیدواژه ها
additive manufacturing-۳D printing-nozzle temperature-tensile strength.مقالات مرتبط جدید
- بهبود مدیریت بحران در ایران: تحلیل اجرای توصیه های ارزیابی و چالش های موجود
- ارزیابی حسابرسان خارجی از عملکرد حسابرسی داخلی در شرکت های پارک علم و فناوری فارس
- فلسفه اخلاقی و باورهای اخلاقی حسابرسان
- نقش هوش مصنوعی در آینده حسابداری: فرصتها و چالشها
- تاثیر یادگیری سازمانی بر آموزش و بهسازی منابع انسانی با نقش تعدیلگر هوش سازمانی
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.