An Investigation on the Metal Injection through the Producing of MIM-ed Low-Alloy Steel
- سال انتشار: 1403
- محل انتشار: مجله مواد دوستدار محیط، دوره: 8، شماره: 1
- کد COI اختصاصی: JR_JEFM-8-1_005
- زبان مقاله: انگلیسی
- تعداد مشاهده: 146
نویسندگان
Department of Materials Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Department of Mechanical Engineering, Nazarabad Centre, Karaj Branch, Islamic Azad University, Karaj, Iran
چکیده
In this study, we demonstrate the injection stage of Metal Injection Molding (MIM) process to fabricate a small bend-typecomponent. This non-standard but critical engine part is made of a feedstock from the low alloy steel ۴۶۰۵. To optimizevarious injection parameters, the five-variable Box-Behnken Design (BBD) is used with the assumption of a quadraticmodel, together with the statistical method of Response Surface Methodology (RSM). Samples are then fabricated, and theirdensities are measured. Hence, the significance of these factors as well as the mutual coupling between each two parametersare investigated using the analysis of variance (ANOVA). Finally, this paper reveals that injection temperature of ۱۵۵ ◦C, theinjection speed of ۸۰ mm/s, holding pressure of ۸۳ bar, holding time of ۹ s and the injection pressure of ۱۳۲ bar led to anoptimum density of the green part, which becomes ۴.۸۹۲ g/cm۳. Then, a new sample is produced using these optimizedsettings, and the green component density is measured, which is extremely near to the predicted value. After sintering, theoptimized sample’s density and hardness are compared to the MIM-۴۶۰۵ standard criteria.کلیدواژه ها
Metal Injection Molding, Low Alloy Steel ۴۶۰۵, Feedstock, Density, Response Surface Methodologyاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.