Experimental Measurements and Modeling of Interfacial Tension for Injected Gas + Live Oil Systems at Elevated Pressures

  • سال انتشار: 1392
  • محل انتشار: دومین همایش علمی مهندسی مخازن هیدروکربوری، علوم و صنایع مرتبط
  • کد COI اختصاصی: RESERVOIR02_005
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1732
دانلود فایل این مقاله

نویسندگان

Behnam Mahmoudi

Research Institute of Petroleum Industry (RIPI), Tehran, Iran

Ghafoor Karimi

چکیده

Interfacial tension is a physical parameter which plays an important role in many processes in a number of industrial applications. In the petroleum industry, near-critical fluids recovery, gas condensate recovery, in particular by gas injection, wetting behavior, secondary and tertiary crude oil recovery, low surface tensions are very important to measure. These surface tensions (i.e. liquid/vapor interfacial tensions) must be accurately known because of their dominating influence on capillary pressures, relative permeabilities and residual liquid saturations. These properties depend heavily on the density of the phases involved.One objective of this study was to develop an accurate measuring procedure for this system using the pendant drop method based on Iranian oil Reservoir samples and its immiscible injecting gas at reservoir condition. Another objective was to study the behavior of the interfacial tension with pressure and temperature in a range of (14.7-4500 Psia) and (110-200 ºF). Since experimental measurements are often unavailable, expensive and time-consuming, models are regularly used. A new correlation for estimating of IFT was provided using non-linear multivariable regression method. This correlation uses density difference as input value, detailed comparisons show that validity and accuracy of the new correlation are in good agreement with experimental data set of Iranian oil reservoir fluids.This paper is organized as follows. Section 1 is related to introduction. Section 2 describes the experimental method and apparatus and discusses the obtained results and their accuracy and reproducibility. Section 3 focuses on new correlation and comparing with experimental data. We outline our conclusions in Section 4

کلیدواژه ها

interfacial tension, pendant drop, correlation, gas injection, temperature, Iranian crude, pressure

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.