Microseismic Monitoring of Petroleum Reservoirs and Mines

  • سال انتشار: 1382
  • محل انتشار: چهارمین کنفرانس بین المللی زلزله شناسی و مهندسی زلزله
  • کد COI اختصاصی: SEE04_SI20
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1529
دانلود فایل این مقاله

نویسندگان

Hilmar Bungum

Norwegian Seismic Array (NORSAR), P.O. Box ۵۳, N-۲۰۲۷ Kjeller, Norway

چکیده

We have developed a software system for automatic monitoring of microseismic data, designed to allow for the use of 3C seismic sensors deployed in 3D configurations, including observation wells. The system contains modules for the interactive input of geophone positions, data formats, seismic velocities and technical parameters for the individual processing steps.Additionally it provides a module to determine the orientation of the geophones. Usually borehole geophones are gimbal-mounted so that one component is oriented into the vertical direction, while the orientation of the horizontal components is random and has to be determined by use of calibration shots. The key elements of the automatic data processing are detection, phase picking, polarization analysis and finally the localization.We will present the application of the software system to a hydro-fracturing data set. The data were recorded continuously with 12 3C geophones deployed in a vertical observation well about 100 m away from the injection well. The sampling rate was 0.5 ms resulting in a data flow of about 1 Gbyte per hour. During the 1-hour recording period about 1000 microseismic events occurred which exhibit temporal and spatial clustering. The processing and localization could be performed in real time.The system is presently being used and tested also against other data sets, such as the San Andreas Fault Observatory at Depth (SAFOD) at Parkfield, where data have been obtained from a 32 level 3 component geophone string deployed in a 2 km deep pilot well.Later, a 4 km deep main borehole will be drilled and instrumented, penetrating the fault zone.

کلیدواژه ها

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.