Creep Behavior of Fiber Reinforced Mortars and Its Effect to Reduce the Differential Shrinkage Stress
- سال انتشار: 1402
- محل انتشار: ژورنال مهندسی عمران، دوره: 9، شماره: 8
- کد COI اختصاصی: JR_CEJ-9-8_014
- زبان مقاله: انگلیسی
- تعداد مشاهده: 32
نویسندگان
چکیده
This research aims to develop durable repair materials that can resist shrinkage cracking by exploring the role of creep in reducing shrinkage stress. In this regard, the creep effect can only be quantified if an accurate creep prediction model and theoretical analysis of the shrinkage stress in the patch repair system exist. For this purpose, the research was carried out in the following sequences: first, the research investigated the short-term creep of the patch repair materials containing accelerator and micro-synthetic fibers in the ۰.۰۰–۰.۱۲% volume fraction range. This short-term creep was measured on five-cylinder specimens (having a diameter of ۷۵ mm and a height of ۲۷۵ mm). Three specimens were used to determine the deformation of the repair material under unloading conditions, while those remaining were used to determine the total deformation under loading conditions. The amount of creep deformation was determined by taking away the unloaded (shrinkage) and instantaneous (elastic) deformations from the total deformation of the loaded specimens. Secondly, a modified prediction model of ACI ۲۰۹R-۰۸ is introduced to accurately capture the rate and magnitude of the observed creep of the repair materials. Finally, a formulated theoretical analysis of shrinkage stress in the patch repair system was proposed to examine how creep potentially reduces the repair material's cracking tendency. The results show that the asymptotic value of the creep curve is attained at an earlier age and that its magnitude is greater than that of most concrete. The modified ACI ۲۰۹R-۰۸ prediction model can closely estimate the repair materials' creep behavior. The best-fit line, residual values, and coefficient of error analyses confirm the modified model's prediction accuracy. The analysis of tensile stress development in the repair layer suggests that creep can reduce stress by up to ۵۰%. With such a reduction, the repair material is expected to be durable in resisting shrinkage and cracking tendency. Doi: ۱۰.۲۸۹۹۱/CEJ-۲۰۲۳-۰۹-۰۸-۰۱۴ Full Text: PDFکلیدواژه ها
Creep; Fiber; Prediction Model; Repair Material; Differential Shrinkage Stress.اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.