Effect of curing system on mechanical properties of Poly-propylene/polybutadiene rubber blends
- سال انتشار: 1402
- محل انتشار: هشتمین همایش بین المللی نفت، گاز، پتروشیمی و HSE
- کد COI اختصاصی: OGPH08_035
- زبان مقاله: انگلیسی
- تعداد مشاهده: 45
نویسندگان
MSc, Department of Polymer Engineering, Amirkabir University of Technology, Tehran, Iran
Associate Professor, Department of Polymer Engineering, Amirkabir University of Technology,Tehran, Iran
Professor, Department of Polymer Engineering, Amirkabir University of Technology, Tehran,Iran
چکیده
In this study, polymeric blends based on polypropylene/ polybutadiene rubber (PP/BR) were prepared via melt mixing process. To increase the uniformity of the blend morphol-ogy, improve its stability and increase the compatibility between PP and BR dynamic vulcanization was applied to the blend and the influence of various curing systems, in-cluding peroxide curing and sulfur curing, on the mechanical properties and impact strength of the blend, was investigated. It was found that peroxide curing has a shorter scorch time than sulfur curing, while the cure time of peroxide curing is longer than that of compound with sulfur curing. Furthermore, the torque variations seen in peroxide cur-ing were greater than those in sulfur curing, suggesting a higher degree of cross-linking in peroxide curing. The results indicate that peroxide curing leads to a notable reduction in the elongation at break of the blend. Less reduction of elongation at break in sulfur curing compound compared to peroxide curing one was observed. The yield point of the sulfur cured composite was less than that of the peroxide cured composite. However, the im-pact resistance trend was the opposite.کلیدواژه ها
Polypropylene, polybutadiene, dynamic vulcanization, mechanical propertiesمقالات مرتبط جدید
- مروری بر روش امواج پلاسما در ازدیاد برداشت از مخازن نفتی
- مروری بر ارزیابی روش های EOR مبتنی بر گاز در مناطق هجوم گاز در مخازن کربناته با شکستگی
- Investigating the create of asphaltic sludge caused by the acidizing process of oil well in the presence of microwaves
- بررسی و مطالعه تجربی جداسازی یون مس توسط فرآیند جداسازی مایع- مایع در میکرو استخراج با هدف بهینه سازی و تعیین پارامترها
- مطالعات امکان سنجی ساخت و ارزیابی کیفی کاتالیست واکنش هیدروژن دار کردن کربن دی اکسید برای تولید متانول
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.