Effect of In-Plane Loads on Natural Frequency of Transversely Isotropic Thick Annular Sector Plate
- سال انتشار: 1391
- محل انتشار: دومین کنفرانس بین المللی آکوستیک و ارتعاشات
- کد COI اختصاصی: ISAV02_166
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1413
نویسندگان
Mechanical Engineering Department, Amirkabir University of Technology, Hafez Ave
چکیده
In this paper, effects of in-plane loads on the vibration of transversely isotropic annular sector plate have been studied. Based on third-order shear deformation plate theory, the governingcoupled partial differential equations have been analytically solved. By doing some mathematical manipulations, these equations are converted to decoupled differential equations.Based on Levy’s solution, the radial edges are assumed to be simply supported and differentboundary conditions are considered for circular edges. Therefore, nine different boundary conditions are considered here. At first, stability equations have been analytically solved andthe critical buckling loads obtained. Then, the natural frequency has been extracted from thegoverning equations of motion subjected to in-plane loads. The results show that the in-plane loads affect significantly natural frequency of transversely-isotropic annular sector plate. Furthermore,these results are highly dependent to boundary conditions. By considering severalload ratios, the natural frequencies have been evaluated. It is observed that the natural frequency of annular sector plate vanishes when the applying load equals to the critical buckling load. In most boundary conditions, increasing the load ratios causes to decrease the natural frequencyکلیدواژه ها
Vibration; In-plane loads; Annular sector plate; Transversely isotropicمقالات مرتبط جدید
- بررسی اثرات انتشار امواج لرزه ای در سازههای قاب خمشی دسته شده و هگزاگرید دارای پارامتر سختی یکسان
- شناسایی آزمایشگاهی ترک طولی تراورس بتنی پیش تنیده با استفاده از تست مودال تجربی
- Investigation of Transmission Loss and Absorptioncoefficient of the PU Composite Panels forConstruction Application
- Comprehensive Analysis of the Effect of Polyisobutyl-ene (PIB) Molecular Weight on Damping Properties of Butyl-Based Constrained Layer Damping Systems
- REVIEWING THE OBERST BEAM METHOD AND ITS AP-PLICATION IN CONSTRAINED LAYER DAMPING FOR AUTOMOTIVE NOISE, VIBRATION, AND HARSHNESS (NVH) CONTROL
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.