The basis of naming reaching laws for sliding surface in SMC approaches

سال انتشار: 1402
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 104

فایل این مقاله در 31 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:


تاریخ نمایه سازی: 20 دی 1402

چکیده مقاله:

A reaching law for non-linear sliding surface in sliding mode control (SMC) determines how states approach and converge onto the predefined sliding surface from various initial conditions or trajectories. It establishes dynamic equations governing state evolution towards this target region, enabling controlled motion along this manifold while ensuring stability properties. The term "non-linear sliding surface" in the context of SMC refers to the mathematical representation of the desired behavior that states or trajectories of the system should follow during system operation. The reaching law is an essential component within this non-linear sliding surface framework.A reaching law for a non-linear sliding surface depends on various issues such as “system dynamics”, “stability Analysis”, “sensitivity analysis”, “violent chattering phenomenon reduction”, “control-input constraints”, “Robustness against uncertainties and Bounded Unknown External disturbances (BUE-disturbances)”, “experimental validation”, “desired Performance Objectives”, “prior knowledge/experience”, and “computational complexity”. Therefore, each of these issues has a special impact on the design of a reaching law, and a designer must consider these issues in his design based on his request for the reaching law. A SMC approach has two parts: one is the reaching phase and the other is the sliding phase. The reaching law is the process of system’s states reaching a non-linear sliding surface. In this study, the basic methods of naming reaching laws were reported.

کلیدواژه ها:


Farbood Shokouhi

School of Mechanical Engineering, Iran University of Science and Technology (IUST), Tehran, Iran