Simultaneous Optimal Design of PID and MATMD Considering their Proposed Elevation Placement for Seismic Control of Tall Buildings on Soft Soil
- سال انتشار: 1402
- محل انتشار: مجله الکترونیک صنعتی ،کنترل و بهینه سازی، دوره: 6، شماره: 4
- کد COI اختصاصی: JR_IECO-6-4_001
- زبان مقاله: انگلیسی
- تعداد مشاهده: 75
نویسندگان
Department of Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran
Department of Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran
Department of Civil Engineering, Birjand University of Technology, P.O. Box ۹۷۱۷۵-۵۶۹, Birjand, Iran
Department of Electrical Engineering, Technical and Vocational University (TVU), Tehran, Iran
چکیده
This research proposes an innovative process to locate devices in elevation using structural results in uncontrolled and controlled (passive and active) states, considering Soil-Structure Interaction (SSI) effects, especially for soft soil. Also, a Proportional Integral Derivative (PID) controller with active single and multiple control devices is used for tall buildings under earthquakes. In addition, the simultaneous and non-simultaneous tuning of the design parameters are examined. The results of applying PID with a Multiple Active Tuned Mass Damper (MATMD) compared with the Single-Active Tuned Mass Damper (SATMD) show that the proposed process of locating the control devices reduces responses significantly. It also reduces the computational efforts of the optimization noticeably. The results of the non-simultaneous tuning of design parameters in all states also indicate an increase in the instability potential of the structure compared with simultaneous tuning. On the other hand, the reduction of the Root Mean Square (RMS) of the responses compared with the uncontrolled state confirms the effective performance of the system during earthquakes. Therefore, this research helps researchers gain a new design vision of how to locate control devices in tall buildings without optimization calculations and how to set parameters in the presence of SSI effects.کلیدواژه ها
Tall buildings, PID controller, SATMD, MATMD, SSI effectsاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.