Partial Discharge Pattern Recognition in GIS Using External UHF Sensor

  • سال انتشار: 1402
  • محل انتشار: مجله پژوهش های کاربردی در مهندسی برق، دوره: 2، شماره: 1
  • کد COI اختصاصی: JR_JAREE-2-1_010
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 93
دانلود فایل این مقاله

نویسندگان

Reza Rostaminia

Electrical Engineering Department and Centre of Excellence in Power System Management and Control, Sharif University of Technology, Tehran ۱۴۵۸۸۸۹۶۹۴, Iran

Mehdi Vakilian

Electrical Engineering Department and Centre of Excellence in Power System Management and Control, Sharif University of Technology, Tehran ۱۴۵۸۸۸۹۶۹۴, Iran

Keyvan Firouzi

Electrical Engineering Department and Centre of Excellence in Power System Management and Control, Sharif University of Technology, Tehran ۱۴۵۸۸۸۹۶۹۴, Iran

چکیده

Partial Discharge (PD) measurement is one of the best solutions for condition assessment of Gas Insulated Switchgears (GISs). For having Condition-based maintenance of GIS, online PD monitoring is of great importance. For this aim, Ultra High Frequency (UHF) PD sensors should be installed inside the GIS during the installation. However, in most installed GISs in industries, the internal UHF PD sensors are not installed. In this paper, a new method for online defect type recognition according to external UHF PD sensors and based on the time-frequency representation of PD signal is proposed. In this case, four artificial defect types named protrusion on the main conductor, protrusion on the enclosure, free moving metal particle, and metal particle on spacer are implanted inside the ۱۳۲ kV L-Shaped structure of one phase in enclosure GIS. The signal energy at each level of the decomposed signal by Discrete Wavelet Transform (DWT) is applied for features of each defect type. The trends of signal energy variations at each frequency range of signal are applied for discriminating between each defect type. The Deep Feed Forward Network (DFFN) classifier is applied for PD pattern recognition. The results show the benefits and simplicity of the proposed method for PD signal classification, independent from the position of the PD sensor, especially in the case of online PD monitoring of GIS.

کلیدواژه ها

Gas Insulated Switchgear (GIS), Partial Discharge (PD), Ultra High Frequency (UHF) measurements, Pattern Recognition, Time-frequency representation

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.