Numerical Study of Convective Heat Transfer and Pressure Drop in a Special Design Channel for Laminar Flow Condition

سال انتشار: 1402
محل انتشار: هفتمین کنفرانس بین المللی توسعه فناوری در مهندسی مکانیک و هوافضا
کد COI اختصاصی: METEC07_019
زبان مقاله: انگلیسی
تعداد مشاهده: 94

نویسندگان

Mechanical Engineering Department, University of Urmia, Urmia, Iran

چکیده

In the study, a channel of special geometry with a depth of ۳۰ cm was used at an entry angle of ۲۰, ۳۰,۴۰, and ۵۰ degrees. Gambit software has been used to create geometry, grids, and boundary conditions, and Fluent software has been used to analyze numerical results. The number of grids used while maintaining the independence of the results was about ۱۲۰ thousand rectangular cube grids that were used in a structuredmanner. In this study, the laminar flow regime in the range of Reynolds numbers between ۶۳۰ and ۱۹۰۰ has been subjected to numerical analysis. Due to its high thermal conductivity, aluminum oxide has been used in ۱ , ۲ , and ۳ by volume mixed with water fluid. According to the results, the use of special geometry increased the average Nusselt number and the average heat transfer coefficient. Furthermore, an increase in the Reynolds number for laminar flow causes an increase in the local and average Nusselt number. The use of high-volume percentages of aluminum oxide nanoparticles mixed with water fluid causes an increase in the average Nusselt number so that the highest average Nusselt number obtained in the entire analysis of the present study is related to the Reynolds number of ۱۹۰۰ with the presence of ۳ ofnanoparticles. Also, it is found that in the Reynolds number range of ۲۰۰ to ۱۵۰۰, the use or non-use of nanoparticles up to two percent by volume does not cause a significant change in the pressure drop of the duct. According to the productivity index, the case with alfa ۳۰o and ۳ nanoparticles has better results.

کلیدواژه ها

Convective, Pressure Drop, Laminar flow, Numerical Study

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.