A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids

  • سال انتشار: 1403
  • محل انتشار: ماهنامه بین المللی مهندسی، دوره: 37، شماره: 2
  • کد COI اختصاصی: JR_IJE-37-2_010
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 179
دانلود فایل این مقاله

نویسندگان

M. Nabian Dehaghani

Department of Electrical Engineering, University of Kashan, Kashan, Iran

M. Biglarahmadi

Department of Electrical Engineering, University of Kashan, Kashan, Iran

S. Y. Mousazadeh Mousavi

Department of Electrical Engineering, Faculty of Technology and Engineering, University of Mazandaran, Babolsar, Iran

M. Abdolahi

Department of Electrical Engineering, Faculty of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Iran

چکیده

Due to the widespread adoption of DC source-based distributed energy resources (DERs) and loads, alongside advancements in power electronics technology, DC microgrids (DC MGs) have recently gained significant attention. To effectively implement DC MGs, it is crucial to employ a suitable control strategy that maintains the bus voltage at the desired level and ensures appropriate power sharing among the integrated DERs. To address these objectives, a two-layer control scheme is proposed in this paper. In the primary layer, a customized droop control scheme is introduced, which applies lower voltage drop in comparison to the conventional droop strategies. Simultaneously, in the secondary layer, a modified voltage controller  which is supplemented by a term to enhance power sharing in a distributed manner is employed,. The proposed control strategies are characterized by their simplicity and low communication infrastructure requirements. To assess the efficacy of the proposed control architecture, several case studies, including plug and play integration, load variations, and communication challenges, including link disconnection and noise effects, are conducted. Additionally, the performance of the proposed strategies is benchmarked against an architecture featuring conventional primary droop control and cooperative distributed secondary control approaches. The simulation studies conducted in MATLAB/SIMULINK software demonstrate that the proposed control methods outperform the alternative approaches, confirming their effectiveness in maintaining voltage regulation and power sharing objectives.

کلیدواژه ها

DC microgrids, Distributed secondary control, Droop control, Power sharing, Voltage Regulation

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.