APPLIED MODELING OF COMPUTATIONAL FLUID DYNAMIC FOR ECO-LAB CONCENTRATION CHANGES WITH SEDIMENT TRANSPORT(CASE STUDY SHADEGAN LAKE
- سال انتشار: 1391
- محل انتشار: دهمین همایش بین المللی سواحل، بنادر و سازه های دریایی
- کد COI اختصاصی: ICOPMAS10_209
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1651
نویسندگان
Asistant Professor, University of sistan & baluchestan,
Msc, Tarhe Now Andishan,
Msc, paksarshen, parang_
چکیده
The simulation of hydrodynamics and transport of different substances in lakes and reservoirs is a developing tool in order to predict their internal processes and interactions.Computational fluid dynamic (CFD) modeling allows the combination of these factors to calculate the behavior of all different configurations. In this research modeling of thehydrodynamic flow of heavy metal concentration that is in variation with sediment transport was analyzed. The finite volume method is used to descrete the governed equations of the model. Accordingly, for the modeling of the parameters carried out in thefinite volume method. Two-dimensional depth-integrated model MIKE 21 was used in this study to simulate hydrodynamic and advection-dispersion processes in a full-scale flow.Shallow water equations are used for this purpose, since the scale of features in the horizontal direction is much greater than the vertical, also Lakes are much larger in length and width than they are in depth, and flows of water in the volume are predominantlyhorizontal. The shallow water equations are applied for more efficient numerical solution of flow in this environment. Furthermore equations describing the transport and fate ofconstituents in the water such as contaminants with sediment can be coupled to the hydrodynamic equations. Case study should have appropriate some data for modeling the hydrodynamic of flow, then should be analyzed with numerical method in MIKE 21.Accurate modeling depends on a time history of water surface elevation, current velocity, temperature and salinity. The data for simulation, prepared as time series and line seriesdata, is combined together in the model. The benefits of MIKE 21is that the model contains interaction between hydrodynamic flow and eco-lab module in simulation. Beside this, it involves sand and sediment transport. After the initial run of the software, analyzingthe hydrodynamic and eco-lab module parameters has taken into account. The calibration of parameters by proposed amounts of software manual packs, were edited. Finally, adjusting the optimized amounts for both modules in simulation, the last run of model has done. Output data compared with observed data for accurate discussion. Output is consist of different parameters in which operator can combine them or plotted each outcomeseparately. For precise results, considering parallel parameters such as hydrodynamic flow of heavy metals and sediment transport made into an applicable conclusion. By comparison of verified data and observed data of the real case, it seems that the model is compatible with the parameters of hydrodynamic and eco-lab in real data'sکلیدواژه ها
Computational Fluid Dynamic,MIKE 21,Modeling, Eco-Lab Concentration, sediment transportمقالات مرتبط جدید
- بررسی اثر پارامترهای محیطی (دما، رطوبت) بر داده های پایش سلامت پل های فولادی
- بررسی تاثیر نوع ساینده بر تاول اسمزی پوشش بر پایه اپوکسی بر سطوح فولای آلیاژ کربن در محیط غوطه ور
- مدل اجزای محدود برای ارزیابی تاثیر خروج از مرکزیت بر ظرفیت ورق های پیوستگی در ستون های H شکل
- ارزیابی احتمالاتی قاب خمشی فولادی بر پایه فولاد St۳۷ و St۵۲ تحت زلزله های نزدیک گسل
- خرابی پیشرونده لرزه ای قاب خمشی فولادی ویژه بلند مرتبه مهاربندی شده در برابر زلزله نزدیک گسل
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.