Influence of preparation parameters of γ-Al۲O۳ catalysts on itsperformance in methanol dehydration to dimethyl ether

  • سال انتشار: 1402
  • محل انتشار: بیست و دومین کنفرانس شیمی معدنی ایران
  • کد COI اختصاصی: IICC22_142
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 101
دانلود فایل این مقاله

نویسندگان

Saeed Sahebdelfar

Catalyst Research Group, Petrochemical Research and Technology Company, NationalPetrochemical Company, P.O. Box ۱۴۳۵۸-۸۴۷۱۱, Tehran, Iran

Parisa Moghimpour Bijani

Catalyst Research Group, Petrochemical Research and Technology Company, NationalPetrochemical Company, P.O. Box ۱۴۳۵۸-۸۴۷۱۱, Tehran, Iran

Freydoon Yaripour

Catalyst Research Group, Petrochemical Research and Technology Company, NationalPetrochemical Company, P.O. Box ۱۴۳۵۸-۸۴۷۱۱, Tehran, Iran

Maryam Mahboobi

Catalyst Research Group, Petrochemical Research and Technology Company, NationalPetrochemical Company, P.O. Box ۱۴۳۵۸-۸۴۷۱۱, Tehran, Iran

چکیده

A series of γ-Al۲O۳ catalysts were prepared by precipitation of Al(OH)۳ from aluminum nitratesolutions, using NaOH as precipitating agent, followed by filtering and calcination at ۵۰۰ °C. Theresulting powder was formed as extrudates and tablets prior to performance test. The catalyst weretested in a fixed-bed reactor for dehydration of methanol to dimethyl ether (DME), an alternativeand environmental benign fuel and chemical [۱]. The effect of preparation conditions such asNaOH concentration (۱-۴ M) and forming on catalyst performance were examined. The resultsshowed that higher NaOH concentrations increased the surface area (and thus catalytic activity) ofthe samples (Fig. ۱a) due to increased supersaturation [۲]. A higher NaOH concentration is ofeconomic benefit as it reduces the size of precipitation reactor. Above ۲۷۰°C the reaction wasequilibrium limited, and because of a high DME selectivity (≈۱۰۰%) for all samples, thistemperature is the optimum one in terms of DME yield. When formed as pellets, the extrudatedsample showed higher conversion compared to tableted sample, due to more reduction of porevolume in the latter as a result of much higher pressure applied. The results were compared with acommercial sample and a higher yield was observed for the extrudate sample (Fig. ۱b).

کلیدواژه ها

Methanol dehydration, dimethyl ether, γ-Al۲O۳ Catalyst, precipitation, catalyst forming

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.