The Strain Dependence of Post-Deformation Softening during the Hot Deformation of ۳۰۴H Stainless Steel

  • سال انتشار: 1385
  • محل انتشار: مجله ی بین المللی انجمن آهن و فولاد ایران، دوره: 3، شماره: 1
  • کد COI اختصاصی: JR_ISSIRAN-3-1_001
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 69
دانلود فایل این مقاله

نویسندگان

A. Najafizadeh

Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran

J. Jonas

Department of Metallurgical Engineering McGill University, Montréal, Canada

چکیده

Experiments were carried out in which the dependence of the fractional softening on temperature, time and strain rate was determined in a ۳۰۴H stainless steel. Three prestrain ranges were identified pertaining to three different post-deformation softening behaviors: ۱) prestraining to below the DRX critical strain: strongly strain dependent softening by SRX alone with softening kinetics controlled by growth rate of the nuclei; ۲) prestraining to above the DRX critical strain: SRX + MDRX softening with weaker strain dependence of the kinetics but still controlled by grain growth; ۳) at a prestrain of e* and beyond: nucleation-controlled MDRX softening with the full inhibition of SRX. The transition prestrain e* can exceed the peak strain if the DRX grain refinement  ratio g= D۰/DDRX > ۴. The transition to MDRX-dominated softening can be attributed to a constant value of the normalized strain hardening rate independent of the preloading temperature and strain rate. The softening data from the compression tests show that at e*, the time for half softening t۵۰ exhibits a minimum. These data differ somewhat from observations obtained in the torsion testing of solid bars, in which no strain dependence of t۵۰ was detected at e* and beyond. Whether or not the strain dependence of t۵۰ vanishes in the MDRX range is sensitive to the test method employed to study the post-deformation softening.

کلیدواژه ها

Hot deformation, ۳۰۴H stainless steel, Metadynamic Recrystallization, Softening kinetics

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.