A simple Analytical model for solidification cooling rate based on the local heat flux density
سال انتشار: 1389
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 87
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ISSIRAN-7-2_007
تاریخ نمایه سازی: 6 آبان 1402
چکیده مقاله:
A new simple analytical model for prediction of cooling rate in the solidification process based on the local heat flux density extracted during solidification is introduced. In the modeling procedure, a solidifying control volume is considered in the mushy zone in which a heat balance equation is used to derive the present model. As the local heat flux density is a measurable parameter, the present model can be used directly on a production line. The present model was validated with numerical method and well adopted with analytical model of Garcia et al. The validation depicted that the present model can predict the cooling rate during solidification process with the same accuracy of the numerical method and Garcia’s model. Moreover, it was shown that the present model can be used to calculate the average and local cooling rate, where the available models face some difficulties.
کلیدواژه ها:
نویسندگان
M. Alizadeh
Department of Metals, International Center for Science, High Technology & Environmental Sciences,Kerman,Iran.
S. Jenabali-Jahromi
Science and Engineering, Shiraz University, Shiraz, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :