The Effect of Controlled Thermo Mechanical Processing on the Properties of a High Strength Steel

  • سال انتشار: 1392
  • محل انتشار: مجله ی بین المللی انجمن آهن و فولاد ایران، دوره: 10، شماره: 2
  • کد COI اختصاصی: JR_ISSIRAN-10-2_006
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 134
دانلود فایل این مقاله

نویسندگان

M. Heydarian

Industrials Organization, Isfahan, Iran

چکیده

In this paper, an ultra low carbon High Strength Low Alloy Grade Steel was subjected to a two-step forging process and this was followed by different post cooling methods. The highest strength was obtained at a faster cooling rate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides and carbonitrides. At a slow cooling rate, the strength fell with an increase in ductility due to the larger volume fraction of the less dislocated polygonal ferrite structure. The strength remained almost unchanged with a further decrease in the middle cooling rate due to the formation of a predominantly polygonal ferrite microstructure. At the slower post cooling rates, a high impact toughness value was obtained at the ambient temperature and at -۴۰°C testing temperature; this was due to the fine grained polygonal ferrite microstructure. At all post cooling methods, the change in the impact toughness value at the ambient temperature and at the temperature of ۴۰°C was found to be negligible due to the ultra-low carbon content of the steel.

کلیدواژه ها

Thermo Mechanical Processing, Forging, Mechanical properties, Microstructure

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.