The Effect of Inclusions on Through-thickness Directional Fatigue Behavior of S۳۵۵N Steel Plate
- سال انتشار: 1394
- محل انتشار: مجله ی بین المللی انجمن آهن و فولاد ایران، دوره: 11، شماره: 1
- کد COI اختصاصی: JR_ISSIRAN-11-1_001
- زبان مقاله: انگلیسی
- تعداد مشاهده: 110
نویسندگان
Faculty of Materials Engineering, Sahand University of Technology, Tabriz, ۵۳۳۱۷۱۱۱۱۱, Iran
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, ۱۵۸۷۵۴۴۱۳, Iran
چکیده
Microalloyed S۳۵۵N steel plates are extensively used in bridge and high-rise building structures. One of the factors affecting the mechanical properties is the size and morphology of inclusions. In this research, microalloyed S۳۵۵N steel plates with different sizes of inclusions were examined. One contained long manganese sulfide inclusions (LI material) and the other had short ones (SI material). Fatigue and tensile tests were carried out in through-thickness direction of both materials. Additionally, the fatigue test results were verified by “statistics of extreme value” (SEV) method. The tensile and fatigue tests revealed that toughness and fatigue limit of LI material were ۶۵% and ۳۰% less than those of SI, respectively. The SEV analysis conservatively predicted the fatigue limit of SI material. However, it was not accurate enough in the case of LI. These results could be explained using the behavior of manganese sulfide inclusions as short fatigue cracks in steels.کلیدواژه ها
fatigue, Through-thickness direction, Non-metallic inclusion, Short fatigue crack, Statistics of extreme valueاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.