EXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS

  • سال انتشار: 1395
  • محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 13، شماره: 2
  • کد COI اختصاصی: JR_IJMSEI-13-2_008
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 194
دانلود فایل این مقاله

نویسندگان

M.H. Avazkonandeh-Gharavo

Department of Materials and Polymer Engineering, Faculty of Engineering, Hakim Sabzevari University, Sabzevar, Iran

M. . Haddad-Sabzevar

Department of Materials Science and Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, P.O. Box: ۹۱۷۷۵-۱۱۱۱, Iran

H. Fredriksson

Department of Materials Science and Engineering, Royal Institute of Technology (KTH), Brinellvägen ۲۳, ۱۰۰ ۴۴ Stockholm, Sweden

چکیده

Because the partition coefficient is one of the most important parameters affecting microsegregation, the aim of this research is to experimentally analyse the partition coefficient in Al-Mg alloys. In order to experimentally measure the partition coefficient, a series of quenching experiments during solidification were carried out. For this purpose binary Al-Mg alloys containing ۶.۷ and ۱۰.۲ wt-% Mg were melted and solidified in a DTA furnace capable of quenching samples during solidification. Cooling rates of ۰.۵ and ۵ K/min were used and samples were quenched from predetermined temperatures during solidification. The fractions and compositions of the phases were measured by quantitative metallography and SEM/EDX analyses, respectively. These results were used to measure the experimental partition coefficients. The resultant partition coefficients were used to model the concentration profile in the primary phase and the results were compared with equilibrium calculations and experimental profiles. The results of calculations based on the experimental partition coefficients show better consistency with experimental concentration profiles than the equilibrium calculations.

کلیدواژه ها

Partition Coefficient, Microsegregation, Al-Mg Alloys, Differential Thermal Analysis

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.