Comparison of Catalytic Properties and Cracking Activities of FCC Catalysts bound with Different colloidal Binders: Silica, Alumina and Silica-Alumina sol
- سال انتشار: 1391
- محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران
- کد COI اختصاصی: NICEC14_400
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1504
نویسندگان
Catalysis and Nanostructured Materials Research Laboratory, School of Chemical Engineering, University of Tehran, Tehran, Iran
چکیده
In this paper, catalytic properties and cracking activity of FCC catalysts synthesized with different colloidal binders including silica sol, alumina sol and silica-alumina sol, were evaluated and compared with each other. The catalysts were prepared by incorporation of silica-alumina matrix, kaolin, colloidal binder and Y-zeolite under the same conditions, ion-exchanged with ammonium solution and calcined at 600 °C. Temperature programmed desorption of ammonia (NH3-TPD) and BET surface area measurements were used to characterize the catalysts. It was found that the FCC catalyst made with silica binder (FCC-S) had higher acidity than the other ones, due to Si insertion from silica binder to the zeolite framework at calcination step. The FCC catalyst bound with silica-alumina binder (FCC-S.A) provided the highest surface area. We used triisopropylbenzene (TiPB) as an FCC feed model compound in our experiments, in order to understand the cracking activities of the catalysts. During the whole times on cracking, the TiPB conversion followed this order: FCC-S.A> FCC-A> FCC-S. As a result of greater accessibility of acid sites, FCC-S.A offered more conversion than the others. The alumina-bound catalyst (FCC-A) yielded more valuable products (diisopropylbenzene and cumene) compared to the othersکلیدواژه ها
Colloidal Binder, Cracking Activity, Acidity, Surface Areaمقالات مرتبط جدید
- Synthesis and Characterization of Nitrogen-Doped Graphene Oxide/Iron Polyporphyrin Nanocomposite Material
- سنتز نانوکامپوزیت هیبریدی -۶۷-TisC۲Tx/ZIF به عنوان جاذب موثر در حذف آلاینده رنگی از پساب
- بررسی میانکنشهای درون مولکولی و بین مولکولی افی پروب طراحی شده برای شناسایی گیرنده HER۳ به منظور بهینه کردن ساختار آن
- Technological Advancements in BTEX Removal from Petrochemical Wastewater
- بررسی فرایندهای تجاری پلیمریزاسیون پلی ایزوبوتن لاستیک بوتیل
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.