Granulation and Coating particles by top spray fluidized bed system
- سال انتشار: 1391
- محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران
- کد COI اختصاصی: NICEC14_011
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1402
نویسندگان
Jahad daneshgahi, University of Tehran, Tehran
Azad University, Chemical Engineering Department, Tehran South Branch, Tehran
Sahand University of Technology, Department of Chemical Engineering, Sahand City
Azad University, Chemical Engineering Department, Tehran South Branch, Tehran
چکیده
In this study, basic concepts and important parameters in coating process in fluid bed, various nozzles and fluid beds that is used in industry are described. Fluid bed dryers in Pharmaceutical & Food industry, have many uses. Fluidized bed reactors in chemical engineering field, are relatively new systems. Working with them is hard and there is a little experimental information in this field. So on this type of systems was studied and researched. At first the device, is investigated by various papers and then designed and built over several months. Batch fluid bed system in this work, was chosen for ease and operation include two stages, coating and drying particles in the fluid bed. Also, there are other methods such as computational fluid dynamics (CFD) simulation, for considering of this system.In this work, for time constraint, a few tests are done on the system. After solving the problems of system, numbers of experiments are designed for evaluation of system performance. For reduction and investigation of experiments, Respond Surface Method (RSM) by Minitab software was used. Flotation pattern of particles and fluid air flow were investigated and liquid volumetric flow rate, atomization air and the air for fluidizing particles were variables. Experiment results showed that the coating value is directly proportional to liquid flow rate and varies inversely with air flow rate. Experimental equation and Graphs were derived by RSM and optimized operational areas for better performance of system were determined. The results and the experimental curves obtained in the study were collected at the end of this paperکلیدواژه ها
Coating process, Particles, Granulation, Fluid bed, Two-Fluid nozzleمقالات مرتبط جدید
- سنتز نانو ماده اکسیدگرافن و بررسی تاثیر آن بر روی مقاومت شیمیایی رنگ آلکیدی
- پیش بینی نرخ های تولید چندفازی (نفت، گاز و آب) با استفاده از روش های یادگیری ماشین: مرور بر روش ها و کاربردها
- روشهای کنترل داده محور در مهندسی شیمی
- بررسی جداسازی گاز پروپیلن از پروپان در غشای ۶FDA-durene با استفاده از روش شبیه سازی مولکولی
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.