Cost-Optimal Design and Support Vector Regression

سال انتشار: 1401
محل انتشار: هفتمین کنفرانس بین المللی پژوهش در علوم و مهندسی و چهارمین کنگره بین المللی عمران، معماری و شهرسازی آسیا
کد COI اختصاصی: ICRSIE07_465
زبان مقاله: انگلیسی
تعداد مشاهده: 319

نویسندگان

Assistant professor, Civil Engineering Department, Baghlan University, Baghlan,Afghanistan,

چکیده

This paper presented the use of the Lagrange multiplier method (LMM) for cost optimumdesign of singly and doubly reinforced rectangular concrete beams, under designconstraints. The first part of the study is the basic definitions of LMM and someformulae, which require for the optimum design of the beams. Three numerical exampleswere solved using the LMM, in different situations. Typically, parameters such as thewidth of the beam (b), externally applied ultimate moment (Mu), the compressivestrength of concrete (F'c) and yield strength of steel (Fy) are considered as determinedparameters. The aim is to attain the optimal values of the area of tension (As) and the areaof compression steel (A's), effective depth of the beam (dopt) and the minimum cost of theobjective function (Cmin). In addition, numerical problems analyzed and solved by thestandard design method with Good and reliable results have been obtained. The results ofthe LMM were compared with the results of the standard design method, and thiscomparison showed that the LMM could successfully be used to minimize the cost of thereinforced concrete beams without the need for repeated trials. As result, the proposedapproach is a powerful, suitable, effective and reliable method for optimum design ofpractical engineering problems. At the final section this paper, the support vectorregression (SVR) was trained with design data, which obtained from the optimal designformulas. After successful trials, SVR predicted with the high accuracy and better results,the parameters previously acquire their optimal values by the LMM.

کلیدواژه ها

Optimal design, singly reinforced concrete beams, doubly reinforced concrete beams,LMM, standard design method.

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.