effect of resistance upset welding parameters on metallurgical sturcture electrical resistivity and tensile strength of heating element 80Ni-20Cr

  • سال انتشار: 1388
  • محل انتشار: کنگره بین المللی جوش و روشهای اتصال
  • کد COI اختصاصی: IIWC01_058
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1432
دانلود فایل این مقاله

نویسندگان

a halvaee

university of tehran

r pahlevan

rolling mill&steel production co

h moghareh

arian gostaresh etesal co

چکیده

resistance upset welding is used for joining heating alloy 8i0Ni-20Cr. This process is performed using heat and pressure simultaneously . Acceptable weld be achieved when the resistivity differences betweenwelded and original elemetnts are less than 10 percent and appropriate tensile strength is acquired there are three main parameters in resistance upset welding electrical power applied pressure and welding time in this research effect of these parameters on structure resistivity and fracture strength of 1.6 mm wire elements has been studied results show that increase of welding power leads to change in resistivity less than 10 percent the fracture strength reaches to its maximum first and subsequently decreases due to coarsening of GAZ grains by properly choosing of welding pressure roughness of joining surfaces is lowered and decreases resistivity and its changes results are satisfying .

کلیدواژه ها

resistance upset welding , resistivity ,welding time ,pressure ,electrical power,tensile strength ,roughness, joinging surface

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.