Synthesis of CuO-ZrO2 nanocomposite via sol-gel method

سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,142

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICNN02_575

تاریخ نمایه سازی: 27 شهریور 1391

چکیده مقاله:

A most promising solution as alternative energy source is hydrogen. Hydrogen ideally produces only water during combustion which makes it an interesting alternative for decreasing CO2 emission. Generating electricity by chemical process, combining hydrogen and oxygen to form water, produces no emissions at all [1]. Finer precursor powders give rise to larger specific areas in catalyst for high produce of hydrogen [1]. In addition, hydrogen is used in large quantities in the chemical industry [2]. Several methods have been developed to compare CuO/ZrO2 nanoparticles such as sol-gel method [3], precipitation method [4], microemulsion method [5], template method, and so on. Sol-gel route is a promising method to synthesis nanometer-sized particles. The advantages of using zirconia as a catalyst support is to be a unique metal oxide which explicitly possesses special chemical properties such as: (i) it interacts strongly with the active phase; (ii) it possesses high thermal stability and is more chemically inert than classical oxides; (iii) it is the only metal oxide which may possess all four chemical properties; namely acidity, basicity, reducing ability and oxidizing ability [6]. This research work has proposed and verified that the calcination temperature, pH value, catalyst nature and concentration, H2O/precursor molar ratio, chelating agent, aging temperature strongly influence on the morphology as well as interaction between the active species and the support

نویسندگان

y Vahidshad

M.Sc. Student, School of Metallurgy and Materials Engineering, University of Tehran

m Akbari Baseri

Engineering Research Institute, Tehran, Iran

h Abdizadeh

School of Metallurgy and Materials Engineering, University of Tehran

H. R. Baharvandi

Malek-Ashtar University of Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • C. Cuciu, A. C.Hoffmann, A.Vik, The effect of calcination and ...
  • Microstructurl Modifications of Copper Zinc Oxide Catalysts as a Function ...
  • M. K. Dongare, Veda Ramaswamy, C. S. Gopinath, A. V. ...
  • Inga Ritzkopf, Sascha Vukojevic, Claudia Weidenthaler, Jan-Dierk Grunwaldt, Ferdi Schuth, ...
  • Veda Ramaswamy, Mahesh Bhagwat, Darbha Srinivas, Arumug amangalam V. Ramaswamy, ...
  • J.M. Liu, P.Y. Lu, W.K. Weng, Mater. Sci. Eng B ...
  • نمایش کامل مراجع