Tailoring of Eco-Friendly Epoxies with Synergistic Adhesion Strength

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 120

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJMF-9-4_005

تاریخ نمایه سازی: 28 اسفند 1401

چکیده مقاله:

For sustainable development, eco-friendly epoxies, composed of recycled rubber micro-particles and core-shell rubber (CSR) nanoparticles, were processed to improve adhesion strength of an epoxy resin to structural steel substrates. To achieve this, the influence of mixing ratio of a recycled rubber micro-particles and CSR nanoparticles on the adhesion strength and adhesion fracture mechanisms of an epoxy were investigated in the present study. Synergistic adhesion strength was obtained for a certain combination of ۷.۵ parts per hundred resin (phr) CSR nanoparticles and ۲.۵ phr recycled rubber micro-particles. The remarkable increase in adhesion strength was attributable to “branching” of the crack-tip damage zone plus crack deflection to cause an adhesive to cohesive fracture transformation.

نویسندگان

B. Marouf

Department of Materials Science and Engineering, Faculty of Engineering, Urmia University, P. O. BOX ۵۷۵۶۱۵-۱۸۱۸, Urmia, Iran

R. Lesan-Khosh

Baspar Pishrafteh Sharif Company, Tehran, Iran

R. Bagheri

Department of Materials Science and Engineering, Sharif University of Technology, P. O. Box ۱۱۱۵۵-۹۴۶۶, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • D. Mmereki, B. Machola, K. Mokokwe, Status of waste tires ...
  • S.M.R. Costa, D. Fowler, G.A. Carreira, I. Portugal, C.M. Silva, ...
  • Global tire recycling market analysis ۲۰۲۵: opportunity, demands, growth and ...
  • K. Formela, Sustainable development of waste tires recycling technologies–recent advances, ...
  • B.T. Marouf, R.A. Pearson, R. Bagheri, Anomalous fracture behavior in ...
  • A.B. Irez, E. Bayraktar, I. Miskioglu, Fracture toughness analysis of ...
  • H. Wei, J. Xia, W. Zhou, L. Zhou, G. Hussain, ...
  • B.T. Marouf, Y.W. Mai, R. Bagheri, R.A. Pearson, Toughening of ...
  • B.T. Marouf, R. Bagheri, R. Mahmudi, Role of interfacial fracture ...
  • C. Qu, X. Zhang, D. Wang, X. Fan, H. Li, ...
  • B.T. Marouf, R. Bagheri, Applications of epoxy/rubber blends, in: J. ...
  • R. Bagheri, B.T. Marouf, R.A. Pearson, Rubber-toughened epoxies: a critical ...
  • T. Okamatsu, M. Ochi, Effect on the toughness and adhesion ...
  • X. Colom, J. Cañavate, F. Carrillo, J.I. Velasco, P. Pagès, ...
  • X. Colom, F. Carrillo, J. Cañavate, Composites reinforced with reused ...
  • A. Hejna, J. Korol, M. Przybysz-Romatowska, Ł. Zedler, B. Chmielnicki, ...
  • G.S. Chae, H.W. Park, J.H. Lee, S. Shin, Comparative study ...
  • J.P. Schneider, H. Lengsfeld, Toughening of a dicyandiamide-cured epoxy resin: ...
  • R.A. Pearson, A.F. Yee, Influence of particle size and particle ...
  • R. Bagheri, R.A. Pearson, Role of particle cavitation in rubber-toughened ...
  • R. Bagheri, R.A. Pearson, The use of microvoids to toughen ...
  • R. Bagheri, R.A. Pearson, Role of particle cavitation in rubber-toughened ...
  • D. Baek, K.B. Sim, H.J. Kim, Mechanical characterization of core-shell ...
  • P. Tamas-Benyei, E. Bitay, H. Kishi, S. Matsuda, T. Czigany, ...
  • R. Bagheri, M.A. Williams, R.A. Pearson, Use of surface modified ...
  • P. Dittanet, R.A. Pearson, Effect of bimodal particle size distributions ...
  • T.K. Chen, Y.H. Jan, Fracture mechanism of toughened epoxy resin ...
  • M.J. Boynton, A. Lee, Fracture of an epoxy polymer containing ...
  • C. Kaynak, E. Sipahi-Saglam, G. Akovali, A fractographic study on ...
  • G.J. Gerace MJ, Williams MA, Surface-activated rubber particles improve structural ...
  • B. Tekyeh-Marouf, R. Bagheri, R. Mahmudi, Effects of number of ...
  • K.L. Mittal, The role of the interface in adhesion phenomena, ...
  • R.D. Adams, J. Comyn, W.C. Wake, Structural adhesives joints in ...
  • A.J. Kinloch, Adhesion and adhesvies: science and technology, Chapman and ...
  • R.A. Gledhill, A.J. Kinloch, Failure criterion for the fracture of ...
  • A. Romo-Uribe, J.A. Arcos-Casarrubias, A. Flores, C. Valerio-Cárdenas, A.E. González, ...
  • M.H. Karami, M.R. Kalaee, S. Mazinani, M. Shakiba, S. Shafiei ...
  • A.F. Yee, R.A. Pearson, Toughening mechanisms in elastomer-modified epoxies, Journal ...
  • H. Hadavinia, L. Kawashita, A.J. Kinloch, D.R. Moore, J.G. Williams, ...
  • نمایش کامل مراجع