Evaluation of the quality of surface hardening welds for rock ladderpipes of direct reduction unit storage tanks in steel industries

سال انتشار: 1401
محل انتشار: پنجمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب،بیست و سومین کنفرانس ملی جوش و بازرسی و دوازدهمین کنفرانس ملی آزمایش های غیرمخرب و اولین کنفرانس ملی ساخت افزایشی
کد COI اختصاصی: INCWI23_099
زبان مقاله: انگلیسی
تعداد مشاهده: 315

نویسندگان

Technology management and development of Chaharmahal and Bakhtiari steel company

Assistant Professor of Shahid Mohajer Faculty, Chahar Mahal and Bakhtiari Steel Company

چکیده

In this research, the evaluation of the quality of hardfacing welds was done by the fusionwelding process for rock ladder in the middle part of the sponge iron storage tank.Ideally, it would be great. Therefore, the following results were determined, it wasobserved that the amount of carbon in the welding surface is ۴.۶%, which has achieved acompletely martensitic structure, and the range of hardness of the hardened layer wasHRC ۶۱ to ۶۳. The amount of chromium on the surface of the hard layer was about ۲۸%,which the sources showed, including the typical microstructures of hard facing alloys ofchromium-rich layers of the eutectic type. The matrix with chromium of M۷C۳ typecarbides was visible in the surface layer of medium size chromium carbides. The brittleeffect of deposited carbide during cooling below the solubility limit could be reduced byreducing the amount of carbon. In order to confirm the welds, the manual items shouldbe considered, longitudinal cracks are not acceptable and wide cracks (gaps) should notoccur, the cracks should not continue in the base metal, and the cracks should be paralleland with approximately equal distances from each other. To get the quality of a suitablelevel. Also, the welding bands should overlap and overlap each other. The weld metalmust be completely mixed with the base metal

کلیدواژه ها

Storage Tank; Surface Hardness; HARDFACING; Chrome Carbide; Quality Control;Cracks.

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.