Numerical Investigation Impact of the Spacing between Vertical Drains on the Diameter of the Influence Zone

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 129

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ARCE-4-3_003

تاریخ نمایه سازی: 26 بهمن 1401

چکیده مقاله:

Rapid developments of industrial and urban structures and infrastructures necessitate the utilization of remote or unsuitable lands that were not considered for construction in the past. The application of surcharge and prefabricated vertical drains (PVDs) is one the popular methods that is used all around the world as a result of simplicity and high efficiency. One of the issues that may occur in such reclamation projects, is the existence of sensitive infrastructures or structures in the vicinity of the treatment area. There are many variables that affect the diameter of the influence zone such as: the compressibility of weak layers, the height of clay stratums, length of the PVDs and the height of surcharge embankment and so on. In this literature the impact of spacing between PVDs was investigated using finite element modelling. Three test embankments as TS۱, TS۲ and TS۳ were modeled and verified for the study. For TS۱ (PVDs with ۱.۵ m spacing), TS۲ (PVDs with ۱.۲ m spacing) and TS۳ (PVDs with ۱.۰ m spacing) the diameters of the influence zone were ۵۴.۸, ۴۶ and ۴۲.۳ m respectively. As the distance between the PVDs decreases, the influence zone decreases as well and becomes smaller. For the FEM simulation of only surcharge embankment in the absence of PVDs the influence zone after ۴۰۰ days was ۶۴ m in the case that only ۰.۶۵ settlement was reached. It can be seen that the inclusion of PVDs and the utilization of smaller quantities of spacing can be an effective way for the reduction of influence zones where there are concerns regarding adjacent structures or infrastructures.

کلیدواژه ها:

نویسندگان

Mohammad Mehdi Pardsouie

PhD candidate, Department of geotechnical engineering, Estahban Branch, Islamic Azad University, Estahban, Iran

mehdi mokhberi

Assistant professor, Department of geotechnical engineering, Estahban Branch, Islamic Azad University, Estahban, Iran

Mohammad Hadi Pardsouie

M.Sc. student, Department of geotechnical engineering, Estahban Branch, Islamic Azad University, Estahban, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • - Robinson, R. G., Indraratna, B., and Rujikiatkamjorn, Ch, ۲۰۱۲, ...
  • - Roy, D., and Singh, R., ۲۰۰۸, Failure of two ...
  • - Jiang, X., Jiang, Y., Wu, C. Y., Wang, W. ...
  • - Yean-Chin, T., Peir-Tien, L., and Kuan-Seng, K. J., Construction ...
  • - Gue, S. S., ۲۰۲۲, Geotechnical challenges on soft ground, ...
  • - Nguyen, D. C., Vu, N. M., Van Pham, E. ...
  • - Liu, J., Fu, H., Wang, J., Y. Cai, and ...
  • - Indraratna, B., Sathananthan, I., Rujikiatkamjorn, C., and Balasubramaniam, A., ...
  • - Bergado, D. T., Balasubramaniam, A., Fannin, R. J., Holtz, ...
  • - Bergado, D., Balasubramaniam, A., and Long, P., ۲۰۰۶, Strength, ...
  • - Pardsouie, M. M., and Pardsouie, M. H., ۲۰۲۲, The ...
  • - Indraratna, B., Rujikiatkamjorn, C., Wijeyakulasuriya, V., McIntosh, G., and ...
  • - Pardsouie, M. M., and Pardsouie, M. H., Zomorodian, S. ...
  • - Pardsouie, M. M., Momeni, M., Nasehi, S. A., and ...
  • The Importance of Incorporating Hydraulic Modifier Function versus Step Loading in Ground Improvements Including Vacuum Preloading [مقاله ژورنالی]
  • -Asaoka, A., Nakano, M., Noda, T., and Kaneda, K., ۲۰۰۰, ...
  • - Baral, P., Rujikiatkamjorn, C., Indraratna, B., Leroueil, S., and ...
  • نمایش کامل مراجع