Optimization of perovskite solar cell based on perovskite CH۳NH۳PbI۳ with different ETM layers using SCAPS-۱D simulation software
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 165
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
EESCONF09_006
تاریخ نمایه سازی: 24 بهمن 1401
چکیده مقاله:
Energy production using the photovoltaic phenomenon in solar cells can reduce our dependence on fossil fuels and the production of toxic greenhouse gases. Compared to other types of solar cells, perovskite solar cells, although the energy conversion efficiency is low but they have advantages such as light weight, high flexibility, and high absorption, and the processes related to their preparation are lower in cost and complexity than silicon solar cells. Active material (Active layer) and cathode (HTM) are formed. In this article, we have used perovskite CH۳NH۳PbI۳ as active material and titanium oxide (TiO۲), fullerene phenol derivative C۶۱ butyric acid methyl ester (PCBM) and copper gallium selenide (CGSe۲) as electron transfer layer (ETM) and by changing the thickness and creating suitable defects in the layers with the help of SCAPS-۱D simulation software, we simulated an optimized perovskite cell. The obtained results show the superiority of titanium oxide over fullerene phenol derivative C۶۱ butyric acid methyl ester and copper gallium selenide.
کلیدواژه ها:
نویسندگان
Farshid Jamshidi
Applied Sciences Research Center, Kharazmi University, Karaj, Iran
Seyed Mahdi Siadati
Applied Sciences Research Center, Kharazmi University, Karaj, Iran
Somaieh Salmani Shik
Applied Sciences Research Center, Kharazmi University, Karaj, Iran
Mohammad Hossin Majles Ara
Applied Sciences Research Center, Kharazmi University, Karaj, Iran