Multicrystalline Materials Analysis Based on Their Microstructure with Emphasis on Predicting Forming Limit Diagrams
محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 18، شماره: 2
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 126
فایل این مقاله در 26 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-18-2_010
تاریخ نمایه سازی: 24 بهمن 1401
چکیده مقاله:
Phenomenological methods are more diagnostic tools than a predictor, so multi-crystalline material approaches based on their microstructures have been proposed during the last years. The purpose of this research is to review methods taking into account the effect of microstructures and texture deformation on predicting the behavior of sheet metals. These methods can be categorized into six general groups: Taylor-type models, crystal plasticity finite element methods, strain gradient methods, methods that consider dislocations, self-consistent methods, methods based on fast Fourier transform. This paper attempts to explain and compare these methods that have been used to forecasting forming limits or stress-strain curves.
کلیدواژه ها:
نویسندگان
Sedigeh Mohamadnejad Zanjani
department of mechanical engineering, Faculty of Mechanical engineering, University of Guilan, Rasht, Iran
Ali Basti
Department of Mechanical engineering, Faculty of mechanical engineering, University of Guilan, Rasht, Iran
Reza Ansari
Department of mechanical engineering, Faculty of Mechanical engineering, University of Guilan, Rasht, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :