LABORATORY INVESTIGATIONS OF IMMISCIBLE SAG DISPLACEMENT: THE EFFECTS OF SAG RATIO
- سال انتشار: 1391
- محل انتشار: اولین کنفرانس بین المللی نفت، گاز، پتروشیمی و نیروگاهی
- کد COI اختصاصی: ICOGPP01_220
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1750
نویسندگان
MSc student of petroleum engineering
Seyyed Alireza Tabatabaei Nejad
Associate Professor of Petroleum Engineering
Assistant Professor of Petroleum Engineering
MSc of petroleum engineering
چکیده
Nitrogen is one of the gases used in the both miscible and immiscible gas injection processes into the reservoirs. There are some phenomena such asoverriding, fingering and channeling in heterogeneous formations can cause decreasing of break through time in production well during oildisplacement. Surfactant alternating gas injectionprocess is one of the methods commonly used to decrease this problem. The foam resulting from the contact of nitrogen and surfactant, causes increasing of injection gas viscosity. Consequently, the oil and gas contact time and sweep efficiency increases. Inthis paper, an experimental study of the effect of surfactant to gas ratio on oil recovery in secondary oil recovery process during execution of immisciblesurfactant alternating gas injection was examined experimentally. The experiments were performed with sand pack under certain temperature andpressure. However, before the experimental, the concentration of surfactant was optimized in order to minimization of its adsorption on rock surface. Then,the experiments were done with surfactant to gas ratio of 1:1, 1:2, 1:3, 2:1 and 3:1. Finally, the experimental results show that using theconcentration of 1500 ppm of surfactant solution can be used to perform the economic test. These resultsalso showed that the surfactant alternating gas ratioof 1:1 has the maximum oil removal efficiency and generating the foam in a porous media will increase the pressure of injection.کلیدواژه ها
مقالات مرتبط جدید
- ارزیابی ریسک های ایمنی و زیست محیطی شرکت ملی پخش فرآورده های نفتی با کمک تکنیک هازن
- بررسی هیدرودینامیک و زمان اختلاط مخرن همزندار با استفاده از تکنیکهای سرعت سنجی ذرات و القای صفحهای نور فلئورسانس
- کاربردها و چالش های موجود در استفاده از روش تست سازند جهت بررسی خواص استاتیک و دینامیک مخزن
- کاربرد هوش مصنوعی در پیش بینی فرصت های صادرات محصولات صنعت پتروشیمی
- روش های ازدیاد برداشت نفت با استفاده از گاز در میادین فراساحلی: ویژگی ها، نحوه اجرا و شرایط عملیاتی
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.