Comparison of Elasticity Methods, Finite Elements, Software in Solving the Particular Problem of Strength of Materials
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 187
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MCTCD01_007
تاریخ نمایه سازی: 19 آذر 1401
چکیده مقاله:
In this study, the deflection of a specific beam under wide and point loads and a specific bending torque is obtain. The size of all forces and lengths are known. This structure is characteriz by two separate parts; the cross-section and moment of inertia of each are different, which is express numerically. The boundary condition for the beam is that it is closed at the initial and end sides by a fixed-support, the two beams are connect by a pin. There are three ways to solve it. First, we use the one-dimensional finite element method to obtain the deflection, rotation angle, shear force and shear torque along the beam. Then, using the theory of elasticity, the problem is solved to obtain all of the above in this way. also using the Abaqus analytical software, the answers are obtain. Finally, the answers to the three modes will be examined and compared.
کلیدواژه ها:
Beam ، Elasticity ، material Strength ، Finite Element ، Abaqus ، Shear ، Deflection ، Rotation Angle
نویسندگان
Mohammad Reza Jamali
Master student of Mechanical Engineering in Applied Design, Yazd University, Yazd.