Exergy analysis; the practical method for investigating the effect of parallel heating on welding residual stresses
- سال انتشار: 1392
- محل انتشار: بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک
- کد COI اختصاصی: ISME21_336
- زبان مقاله: انگلیسی
- تعداد مشاهده: 223
نویسندگان
Senior Mechanic Engineer
Assistant professor, Ferdowsi University of Mashhad
Auto Mechanic Engineer
چکیده
In this paper, analytical relations of energy and exergy efficiency are written for GMA welding. Then the effects of parallel heating on these two efficiencies are checked. The difference between these two efficiencies is due to welding processes irreversibility. Residual stresses are type of irreversibility. So, the effect of parallel heating on welding residual stresses are checked by difference between these two efficiencies (dimensionless entropy).Flame heating are assumed as point and spot heat sources. Also, it is shown that the temperature distribution is quasi-steady. What’s more, a parameter is introduced as a ratio of exergy efficiency to energy efficiency that it can help to investigate the amount of cost saving for parallel heating process. The results are adopted with data sources. The results show that by increasing flame power, energy and exergy efficiency will decrease, while; the slope of these efficiencies decreases gradually. In addition, increasing the speed of welding is caused to rise up both efficiencies. Dimensionless entropy decreases because of increasing the internal flames heat. It demonstrates that decreasing the residual stresses are due to welding. This reduction is greater at higher speeds. So, parallel heat at higher speed is more effective to increase the welding quality. As well as, the ratio of two efficiency shows that the heating about ۱۸۰۰ j/s would be economically optimal amount. Finally, considering the results with previous data, use of dimensionless entropy generation for checking the residual stresses of welding has recommended.کلیدواژه ها
Parallel heating, energy efficiency, exergy efficiency, welding residual stresses, entropy generationمقالات مرتبط جدید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.