High speed CML latch using active inductor in 0.18mmCMOStechnology
محل انتشار: نوزدهمین کنفرانس مهندسی برق ایران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,488
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEE19_442
تاریخ نمایه سازی: 14 مرداد 1391
چکیده مقاله:
In this paper, a high speed latch architecture is proposed. This latch is based on a modified CML architecture, in which the tail current source is removed. To further increase the speed, shunt peaking is used. This technique can be implemented using passive or active inductors. Active inductors require smaller on-chip implementation area, but impose some drawbacks such as nonlinearity and noise. Fortunately, these drawbacks can be tolerated in a shunt peaking CML latch. In addition to cost effective implementation, using active inductors in the modified CML latch allows for optimizing the inductance values independently for the track and evaluation phases. This is not possible with passive inductors or common CML latches. Simulations predict that the active inductor loads increase the speed by more than 50% compared to resistive loads, when simulated in 0.18μm CMOS technology with 1.8V supply
کلیدواژه ها:
active inductor ، current mode logic (CML) latch
نویسندگان
pedram Payandehnia
Electrical and Computer Engineering Department, University of Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :