Study on mechanical and physical property of API5CTl80 steel under heat treatment consists of annealing, tempering and quenching.
محل انتشار: سومین کنفرانس بین المللی عملیات حرارتی مواد
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,810
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICMH03_053
تاریخ نمایه سازی: 21 تیر 1391
چکیده مقاله:
API 5CTL80 steel is low alloys steel that because of good mechanical properties and reasonable price are used a lot in oil structures. In this study the physical and mechanical properties of this steel under thermal cycle annealing, austempering and finally Quenching in water is studied. At first samples were annealed at 950 °C for 1 hour. After that for 40 minutes at 720 ° C were tempered. Finally were quenched in water. Results of hardness and tensile tests show achieving high strength and hardness. Microstructure has been detected by light microscopic that indicate good mechanical property is because of bainite and ferrite fine structure.
کلیدواژه ها:
نویسندگان
E Mohammadi
Master Student of Science Ferdowsi University of Mashhad
M.E Masroor
Master Student of Science Ferdowsi University of Mashhad
N. Kiajamali
Master Student of Science Ferdowsi University of Mashhad
M Mohammadpour
Master Student of Science Ferdowsi University of Mashhad
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :