Effect of Austenitizing Temperature on the Microstructure of Ductile Irons Containing 2% Al
محل انتشار: سومین کنفرانس بین المللی عملیات حرارتی مواد
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,896
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICMH03_042
تاریخ نمایه سازی: 21 تیر 1391
چکیده مقاله:
Considering the importance of austenization in preparing steel, it is crucial to have a good understanding of the effects of temperature on this process. In this project, we studied these effects on an aluminum-containing ductile iron sample. We exposed many of these samples for 30 minutes to 890, 920 and 950 Celsius degrees and immediately quenched them in cold water. Micro-structural studies and XRD tests show that samples prepared in 950 degrees have a better micro-structure and hardness. In addition, we found that heat treatment of the as-cast samples containing Fe3Si in matrix microstructure causes the disappearance of this phase
کلیدواژه ها:
نویسندگان
A.R. Kiani-Rashid
Department of Materials Engineering, Faculty of engineering, Ferdowsi University of Mashhad, ۹۱۷۷۵-۱۱۱۱, Mashhad, Iran
M. Masoumi-Khalilabad
Department of Materials Engineering, Faculty of engineering,Ferdowsi University of Mashhad, ۹۱۷۷۵-۱۱۱۱, Mashhad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :