Triple-Nozzle Thermo-Compressor: Geometrical Investigation and Comparison with Single-Nozzle Thermo-Compressor

Primary nozzle is one of the most important factors which has a large influence on the performance of thermo-compressors. Most of studies carried out until now, have been performed on single-nozzle thermo-compressors. In this paper, an actual industrial thermo-compressor is considered and the purpose is to study the effect of increasing primary nozzle number on the performance of this thermo-compressor. For this purpose, a triple-nozzle thermo-compressor is simulated numerically and its performance is compared with single-nozzle thermo-compressor. Ideal gas thermodynamic properties are considered to simulate the compressible flow within the thermo-compressor and numerical result is validated using the experimental result. In addition, the effects of variation in mixing chamber convergence angle and position of nozzles at the radial direction in triple-nozzle thermo-compressor are investigated. The numerical results show that at the same condition, a triple-nozzle thermo-compressor is able to provide superior critical back pressure and entrainment ratio than single-nozzle thermo-compressor. The proximity of nozzles (with ۳۴% changes in radial distance) increases the critical back pressure about ۸% and decreases the entrainment ratio about ۵%. By increasing mixing chamber convergence angle about ۶۶%, the value of critical back pressure decreases about ۲۹% and the value of entrainment ratio decreases about ۱۶% in single nozzle-thermo-compressor and ۱۰% in triple-nozzle thermo-compressor. Also, by ۸% reduction of mixing chamber convergence angle, the critical back pressure decreases ۶% but entrainment ratio decreases about ۲% in single-nozzle thermo-compressor and increases about ۳% in triple-nozzle thermo-compressor.

کلیدواژه ها:

Thermo-compressor ، Single-nozzle thermo-compressor ، Multi-nozzle thermo-compressor ، Numerical simulation ، Entrainment Ratio ، Critical back pressure ، Parametric study