Preparation and characterization of high energetic Al/Ni core-shell nanostructures

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,121

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NAMIC01_097

تاریخ نمایه سازی: 18 تیر 1391

چکیده مقاله:

Aluminum powders are mainly used as energetic additives for propellants. However, particle agglomeration, formation of protective oxide layers on the aluminum particles and high ignition delay time and low ignition velocity of particles, in particular when nano particles are used, lead to incomplete burning of Al particles and subsequently decreasing the propellant efficiency. In this study in order to improve combustion behavior of aluminum particles, nanometric nickel shell coated on the surface of aluminum nanoparticles. Fabrication of such A/Ni core- shell nano structures by electroless nickel deposition (EN) investigated and high efficiency EN process modeled using Artificial Neural Network (ANN) media. Based on presented model it is possible to design an EN bath with the maximum plating rate, while minimum materials are used and maximum efficiency of process are appeared. These samples charactrizated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The results shows, Ni particles were deposited on the surface of aluminum nano particles and form a thin and uniform nickel shell within about 10nm thickness around aluminum cores.

کلیدواژه ها:

aluminum nano particles ، Electroless nickel (EN) deposition ، Artificial neural networks (ANN)

نویسندگان

H. Beigi Nasrabadi

Ferdowsi University of Mashhad, P.O. Box ۹۱۷۷۵-۱۱۱۱, Mashhad, Iran

M. zarei

Sharif University of Technology, P.O. Box ۱۱۳۶۵-۹۴۶۶, Tehran, Iran

B. Shahabi Kargar

Noah Research Center, Mashhad, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • J.L. Cheng, H.H. Hng, H.Y. Ng, P.C. Soon, Y.W. Lee, ...
  • P.E. Bocanegra, C. Chauveau, I. Gokalp, Experimental studies _ the ...
  • COMPOSITE MATERIALS, Jeju Island, Korea, 2011. ...
  • hydrothermal route, Powder Technology, 148 (2004) 3-6. ...
  • S.Q. Liu, W.H. Tao, J. Li, Z.X. Yang, F.T. Liu, ...
  • G.-Z. Zou, M.-S. Cao, L. Zhang, J.G. Li, H. Xu, ...
  • S.K. Das, P. Sahoo, Tribological characteristics of electroless Ni-B coating ...
  • W. Reidel, Electroless Nickel Plating, ASM International, Ohio, USA, 1991. ...
  • G.O. Mallory, J.B. Hajdu, Electroless Plating: Fundamentals and Applications, in, ...
  • _ Zeng, metal coated functionalized single- walled carbon nanotubes for ...
  • R.C. Agarwala, V. Agarwala, Electroless al loy/composite coatings: A review, ...
  • C.A. Leon-Patino, infiltration processing of metal matrix composites using coated ...
  • Engineering, McGill University, Montreal, Canada, 2000. ...
  • R. Zhang, L. Gao, J. Guo, Effect of Cu2, on ...
  • نمایش کامل مراجع