Interaction between One Internal Hole and Two Neighboring Joints under Uniaxial Compression using an Experimental Test and a Numerical Simulation

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 127

فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JMAE-13-2_006

تاریخ نمایه سازی: 29 تیر 1401

چکیده مقاله:

The interaction between an internal hole and two surrounded joints under a uniaxial compression are examined using the experimental and discrete element procedures. Inside the concrete sample, two notches and an internal hole are created. The joint angle change from ۰° to ۹۰° with an increment of ۳۰°. The distances between the joint and the internal hole are ۲ cm and ۳ cm. Also the numerical models are provided. The joint angle change from  ۰° to ۹۰° with an increment of ۱۵°. The distances between the joint and the internal hole are ۲ cm, ۳ cm, and ۴ cm. The compressive strength is ۷.۲ MPa. The rate of loading is ۰.۰۰۵ mm/s. The experiment indicates that the failure process is significantly dependent on the notch angle and the joint distance from the hole. The pattern of fracture and mechanism of failure of joints affect the shear strengths of the samples. The models with joint angles of ۳۰° and ۶۰° have a less compressive strength since the pure tensile failure occurs in these configurations. The model strength decreases with decrease in the join spacing. In fact, in the case that the joint spacing is ۲ cm, the interaction between the hole and the neighboring joint is so strong. Consequently, the compressive strength is declined. In both approaches of the numerical simulation and experimental methods, the pattern and strength of failure are identical.

نویسندگان

V. Sarfarazi

Academic Member, Department of Mining Engineering, Hamedan University of Technology, Hamedan, Iran

K. Asgari

Research Scholar, Department of Mining Engineering, Shahid Bahonar University of Kerman, Kerman, Iran

Sh. Mohamadi Bolban Abad

Research Scholar, Hamedan University of Technology, Hamedan, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Basu, A., Mishra, D.A. (۲۰۱۴). A method for estimating crack-initiation ...
  • Chang, S. H., Lee, C.I. and Jeon, S. (۲۰۰۲). Measurement ...
  • Hoek, C.D. (۲۰۱۴). Fracture initiation and propagation in intact rock–a ...
  • Lisjak, A. (۲۰۱۷). A ۲D, fully coupled, hydro-mechanical, FDEM formulation ...
  • Karimpouli, S., Hassani, H., Malehmir, A. (۲۰۱۳). Understanding the fracture ...
  • Bobet, A. and Einstein, H.H. (۱۹۹۸). Fracture integrate in rock-type ...
  • Wong, R.H.C. (۲۰۰۱). Analysis of crack integrate in rock-like materials ...
  • Sagong, M. and Bobet, A. (۲۰۰۲). Integrate of multiple flaws ...
  • Wong, L.N.Y., and Einstein, H.H. (۲۰۰۹). Crack integrate in molded ...
  • Wong, L.N.Y. and Einstein, H.H. (۲۰۰۹). Crack integrate in molded ...
  • [۱۱].Yang, S.Q. (۲۰۱۱). Crack integrate behavior of brittle sandstone samples ...
  • .Yang, S.Q. (۲۰۰۸). Experimental investigation on strength and failure behavior ...
  • Yang, S.Q., (۲۰۱۲). An experimental study of the fracture integrate ...
  • Wong, L.N.Y. and Einstein, H.H. (۲۰۰۹). Systematic evaluation of cracking ...
  • Park, C.H. and Bobet, A. (۲۰۱۰). Crack initiation, propagation and ...
  • Park, C.H. and Bobet, A. (۲۰۰۹). Crack integrate in specimens ...
  • Kranz, R.L. (۱۹۷۹). Crack-crack and crack-pore interactions in stressed granite. ...
  • Lee, H.K. and Ju, J.W. (۲۰۰۷). A ۳D stress analysis ...
  • Carter, B.J. (۱۹۹۲). Size and stress gradient effects on fracture ...
  • Carter, B.J., (۱۹۹۱). Primary and remote fracture around underground cavities. ...
  • Wong, R.H.C. (۲۰۰۶). Experimental and numerical study on splitting failure ...
  • Bocca, P. , Carpinteri, A. and Valente, S. (۱۹۹۰). Size ...
  • Xu, C. and Fowell, R.J. (۱۹۹۴). Stress intensity factor evaluation ...
  • Trädegård, A. (۱۹۹۸). FEM-remeshing technique applied to crack growth problems. ...
  • Barani, O.R. , Khoei, A.R. and Mofid, M. (۲۰۱۱). Modeling ...
  • Tan, X. H. (۲۰۱۵). A simulation method for perme-ability of ...
  • [۲۷].Ţene, M., (۲۰۱۶). Algebraic multiscale method for flow in heterogeneous ...
  • Supar, K. and Ahmad, H. (۲۰۱۷). XFEM modelling of multi-holes ...
  • Schrefler, B.A. and Xiaoyong, Z. (۱۹۹۳). A fully coupled model ...
  • Aliha, M.R. (۲۰۱۲). Mixed mode I/II fracture path simulation in ...
  • Sukumar, N. (۲۰۰۱). Modeling holes and inclusions by level sets ...
  • . Gordeliy, E. and Peirce, A. (۲۰۱۵). Enrichment strategies and ...
  • Mohammadnejad, T. (۲۰۱۳). An extended fi nite element method for ...
  • Khoei, A.R., (۲۰۱۴). A mesh-independent finite element formulation for modeling ...
  • Gordeliy, E. and Peirce, A. (۲۰۱۳). Coupling schemes for modeling ...
  • Dahi-Taleghani, A. and Olson, J.E. (۲۰۱۱). Numerical modeling of multistranded-hydraulic-fracture ...
  • Réthoré, M.A. (۲۰۰۷). A two-scale approach for fluid fl A ...
  • T.P. Cheng and K.W. Fries, Higher-orderXFEM for curved strong and ...
  • S. Mohammadi, XFEM Fracture Analysis of Composites, John Wiley & ...
  • .Wong, L.N.Y. and Einstein, H.H. (۲۰۰۹). Crack integrate in molded ...
  • Wong, L.N.Y. and Einstein, H.H. (۲۰۰۹). Crack integrate in molded ...
  • Ju, Y. (۲۰۰۸). A statistical model for porous structure of ...
  • Hedjazi, L. (۲۰۱۲). Application of the discrete element method to ...
  • Vahab, M. and Khalili, N.(۲۰۱۸). X-FEM modeling of multizone hydraulic ...
  • Haddad, M. and Sepehrnoori, K. (۲۰۱۶). XFEM-Based CZM for the ...
  • Natarajan, S. (۲۰۱۱). Enriched finite element methods: advances and applications ...
  • Rodriguez-Florez, N. (۲۰۱۷). The use of XFEM to assess the ...
  • Florez R. (۲۰۱۸). Mechanics of Cortical Bone: Exploring the Micro- ...
  • Bouchard, P.O., Bay, F. and Chastel, Y. (۲۰۰۳). Numerical modelling ...
  • Li, H. and Wong, L.N.Y. (۲۰۱۲). Influence of flaw inclination ...
  • Bobet, A. and Einstein, H.H. (۱۹۹۸). Numerical modeling of fracture ...
  • Hosseini-Tehrani, P. (۲۰۰۵). Boundary element analysis of stress intensity factor ...
  • Lu, X. and Wu, W.L. (۲۰۰۶). A sub-region DRBEM formulation ...
  • Zhang, X.P. and Wong, L.N.Y. (۲۰۱۳). Crack initiation, propagation and ...
  • Ghazvinian, A., Sarfarazi, V. (۲۰۱۲). A study of the failure ...
  • Sarfarazi, V. (۲۰۱۴). Numerical simulation of the process of fracture ...
  • Park, J.W. and Song, J.J. (۲۰۰۹). Numerical simulation of a ...
  • Wu, Z. and Wong, L.N.Y. (۲۰۱۲). Frictional crack initiation and ...
  • Cai, Y.C. (۲۰۱۳). A continuous/discontinuous deformation analysis (CDDA) method based ...
  • Zhuang, X.Y. and Augarde, C. (۲۰۱۰). Aspects of the use ...
  • Zhu, H.H. (۲۰۱۱). High rock slope stability analysis using the ...
  • [۶۳. Itasca, (۲۰۰۴). PFC۲D (Particle Flow Code in ۲ Dimensions), ...
  • Potyondy, D.O. and Cundall, P.A. (۲۰۰۴). A bonded-particle model for ...
  • Zhang, X.P. and Wong, L.N.Y. (۲۰۱۲). Cracking processes in rock-like ...
  • Lee, H. and Jeon, S. (۲۰۱۱) An experimental and numerical ...
  • Uzun Yaylacı, E., Yaylacı, M., Ölmez, H., and Birinci, A. ...
  • Yaylacı, M., Eyüboğlu, A., Adıyaman, G., Uzun Yaylacı, E., Öner, ...
  • Yaylacı, M., Yaylı M., Uzun Yaylacı E., Ölmez, H., and ...
  • Yaylaci, M. (۲۰۱۶). The investigation crack problem through numerical analysis. ...
  • Haeri, H. and Marji, MF. (۲۰۱۶). Simulating the crack propagation ...
  • Discrete element modeling of explosion-induced fracture extension in jointed rock masses [مقاله ژورنالی]
  • Yavari, MD. (۲۰۲۱). On the propagation mechanism of cracks emanating ...
  • Abdollahipour, A. and Marji, MF. (۲۰۲۰). A thermo-hydromechanical displacement discontinuity ...
  • Bakhshi, E. (۲۰۱۹). Hydraulic Fracture Propagation: Analytical Solutions versus Lattice ...
  • Lin, P., (۲۰۱۵). Experimental study of coalescencemechanisms and failure under ...
  • Lin, Q., (۲۰۲۰). Mechanical behavior around double circular openings in ...
  • نمایش کامل مراجع