ورود
مقالات فارسیISIکنفرانسهاژورنالها

Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing

محل انتشار: مجله مکانیک کاربردی و محاسباتی، دوره: 8، شماره: 4
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 158

فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:
https://civilica.com/doc/1478922

شناسه ملی سند علمی:

JR_JACM-8-4_024

تاریخ نمایه سازی: 15 تیر 1401

چکیده مقاله:

The mechanical properties of a polycarbonate matrix composite with glass fiber reinforcements used for the manufacture of a multistage centrifugal pump impeller are researched in this article. The material properties are modelled using DIGIMAT (The Material Modelling Platform) to determine the strain resistance of the composite with different proportions of reinforcements. The Tsai–Hill failure criterion is used to determine the strength in all cases. The results have been verified by physical testing to determine the influence of the shape and mass proportion of reinforcements on its mechanical properties. The strength of the manufactured part is correlated to technological factors using the MARC MENTAT solver, and the most and the least favorable combinations of these factors are determined.

کلیدواژه ها:

impeller ، polymer-composite materials ، mechanical schematic ، stress ، strain‎

نویسندگان

Madina Isametova

Department of Mechanical Engineering, Standardization, Certification and Metrology, Institute of Energy and Mechanical Engineering, Satbayev University,‎ Satpaev Street ۲۲, Almaty, KZ-۰۵۰۰۰۰, Kazakhstan

Rollan Nussipali

Department of Mechanical Engineering, Standardization, Certification and Metrology, Institute of Energy and Mechanical Engineering, Satbayev University,‎ Satpaev Street ۲۲, Almaty, KZ-۰۵۰۰۰۰, Kazakhstan‎

Dimitar Karaivanov

Department of Applied Mechanics, University of Chemical Technology and Metallurgy, ۸ St Kliment Ohridski Blvd, Sofia, BG-۱۷۵۶, Bulgaria

Zhastalap Abilkhair

Department of Mechanical Engineering, Standardization, Certification and Metrology, Institute of Energy and Mechanical Engineering, Satbayev University,‎ Satpaev Street ۲۲, Almaty, KZ-۰۵۰۰۰۰, Kazakhstan‎

Aysen Isametov

Department of Mechanical Engineering, Standardization, Certification and Metrology, Institute of Energy and Mechanical Engineering, Satbayev University,‎ Satpaev Street ۲۲, Almaty, KZ-۰۵۰۰۰۰, Kazakhstan‎

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Yakimov, S.B., Ivanovsky, V.N., Degovtsov, A.V., Eliseev, D.B., Aygishev E.V., ...
  • Fragassa, C., Lightening structures by metal replacement: from traditional gym ...
  • Tserpes, K., Tzatzadakis, V., Computation of mechanical, thermal, and electrical ...
  • Mastrogiannakis, I., Vosniakos, G., Exploring structural design of the Francis ...
  • Zirak, N., Shirinbayan, M., Deligant, M., Tcharkhtchi, A., Toward Polymeric ...
  • Wang, R., Zheng, S., Zheng, Y., Polymer matrix composites and ...
  • Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [مقاله ژورنالی]
  • Mallick, Vi., Thermoplastic composite based processing technologies for high performance ...
  • Li, Q., Piechna, J., Müller, N., Static, Dynamic and Failure ...
  • Pavlovic A., Finite Elements Analysis of the Hyperelastic Impeller Rotating ...
  • Islam, M.N., Ar-Rashid, H., Islam, F., Karmaker, N., Koly, F.A., ...
  • Liu, Y., Guo, Y., Zhao, J., Chen, X., Zhang, H., ...
  • Nayak, R.K., Ray, B.C., Rout, D., Mahato, K.K., Hydrothermal Behavior ...
  • Mohan, N., Mahesha, C., Rajaprakash, B.M., Erosive Wear Behaviour of ...
  • Öztürk, B., Gedikli, H., Kılıçarslan, Y.S., Erosive wear characteristics of ...
  • Zirak, N., Shirinbayan, M., Deligant, M., Tcharkhtchi, A., Toward Polymeric ...
  • Gülich, J.F., Effect of Reynolds number and surface roughness on ...
  • Elanchezhian, C., Ramnath, B.V., Hemalatha, J., Mechanical Behaviour of Glass ...
  • Marius, S., On the durability of progressive cavities pumps, Reliability ...
  • Kostyuk, A.G., Dinamika i prochnost’ turbomashin, Izdatel’skiy dom MEI, Moscow, ...
  • Roche-Carrier, N.L., Ngoma, G.D., Ghié, W., Numerical Investigation of a ...
  • Spasic, Ž., Jovanovic, M., Bogdanovic-Jovanovic, J., Milanovic, S., Numerical investigation ...
  • Zhang, Z.C., Wang, F.J., Yao, Z.F., Leng, H.F., Zhou, P.J., ...
  • Nadal, E., Ródenas, J.J., Albelda, J., Tur, M., Tarancón, J.E., ...
  • Isaeva, I., Povetkin, V., Isametova, M., Kerimzhanova, M., Bukayeva, A., ...
  • Zhu, S., Guo, Y., Chen, Y., Liu, S., Low Water ...
  • Suzuki, T., Chihara, H., Kotaka, T., Sorption of Water by ...
  • Nazarov, S.A., Teorema Eshelbi i zadacha ob optimalnoi zaplate, Algebra ...
  • Barral, M., Chatzigeorgiou, G., Meraghni, F., Leon, R., Homogenization using ...
  • McCarthy, C.T., McCarthy, M.A., Gilchrist, M.D., Predicting Failure in Multi-Bolt ...
  • Osman, M.A., Atallah, A.S., Effect of the particle size on ...
  • Yang, K., Yang, Q., Li, G., Sun, Y., Feng, D., ...
  • Ozawa, Y., Watanabe, M., Kikuchi, T., Ishiwatari, H., Mechanical and ...
  • Singh, U.P., Biswas, B.K., Ray, B.C., Evaluation of mechanical properties ...
  • Bazhenov, S., Serenko, O., Dubnikova, I., Berlin, A., Criterion of ...
  • Dubnikova, I.L., Kedrina, N.F., Solov’eva, A.B., Timofeeva, V.A., Rozhkova, N.N., ...
  • Isametova, M., Abilezova, G., Dishovsky, N., Velev, P., Development and ...
  • Fernandes, C., Pontes, A.J., Viana, J.C., Gaspar-Cunha, A., Modeling and ...
  • Rosli, M.U., Termizi, S.N.A.A., Khor, C.Y., Nawi, M.A.M., Omar, A.A., ...
  • Khan, M., Afaq, S.K., Khan, N.U., Ahmad, S., Cycle Time ...
  • Mashkov, Iu. K., Mekhanicheskie i tribotekhnicheskie svoistva polimernykh kompozitsionnykh materialov ...
  • Fernandes, C., Pontes, A.J., Viana, J.C., Gaspar-Cunha, A., Modeling and ...
  • Bociaga, E., Jaruga, T., Lubczynska, K., Gnatowski, A., Warpage of ...
  • Choudhury, A., Mondal, S.C., Sarkar, S., Failure Analysis of Laminated ...
    • نمایش کامل مراجع