Optimization of the operating parameters and their effects on the degradation of Naphthol Blue Black by the Fenton process
- سال انتشار: 1400
- محل انتشار: دوفصلنامه تحقیقات کاربردی در آب و فاضلاب، دوره: 8، شماره: 2
- کد COI اختصاصی: JR_ARWW-8-2_008
- زبان مقاله: انگلیسی
- تعداد مشاهده: 87
نویسندگان
۱Environment Engineering Laboratory, University Badji-Mokhtar of Annaba, Algeria. ۲Department of Process Engineering, Faculty of Engineering Sciences, University Badji-Mokhtar of Annaba, Algeria.
۲Department of Process Engineering, Faculty of Engineering Sciences, University Badji-Mokhtar of Annaba, Algeria. ۳Organic Synthesis Laboratory, Modeling and Optimization of Processes, University Badji-Mokhtar of Annaba, Algeria.
۱Environment Engineering Laboratory, University Badji-Mokhtar of Annaba, Algeria. ۲Department of Process Engineering, Faculty of Engineering Sciences, University Badji-Mokhtar of Annaba, Algeria.
۲Department of Process Engineering, Faculty of Engineering Sciences, University Badji-Mokhtar of Annaba, Algeria. ۳Organic Synthesis Laboratory, Modeling and Optimization of Processes, University Badji-Mokhtar of Annaba, Algeria.
چکیده
The objective of this work was to model and optimize the degradation of black azodye Naphthol Blue Black (NBB) by the Fenton process (advanced oxidation)using a minimum of experiments. A Plackett-Burman screening design was firstapplied to determine the main factors influencing the process. The dyediscoloration efficiency gave a yield approximately equal to ۹۷ % in the bestconditions of several operating parameters used. The variance analysis (ANOVA)showed the effects of all different factors and deduced the most important ones.Subsequently, a second quadratic design of experiments central composite type(CCD) was applied using the response surface methodology (RSM) to optimizethe most important parameters deduced by the first design cited above, in order toobtain the best performance of the discoloration of NBB with this process. So from the contour plots and the response surfaces, the discoloration yield enhanced to the maximum and the optimization plot given by the Mnitab software, showed the following optimized parameters [NBB]=۳۷.۵ mg/L, [H۲O۲]=۶۶.۵ mg/L, [Iron]=۳.۵ mg/L and pH=۳.۴ for a yield of ۱۰۰ % with a desirability of ۱.۰۰۰۰. At last, to confirm that the discoloration was due to the degradation of the dye, the chemical oxygen demand (COD) was studied and in the optimized conditions, the degradation reached ۹۴.۷۸ % after ۱۲۰ min of treatment. The kinetics of the dye degradation showed by the COD abatement was relatively slow compared to the kinetics of the dye discoloration.کلیدواژه ها
Water treatment, Fenton Process, Degradation, Azo dye, Experimental designsاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.