Mechanical Analysis of Thermally Activated Muscle-Like Actuator Made of Twisted and Coiled Fishing Line
- سال انتشار: 1401
- محل انتشار: سی امین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران
- کد COI اختصاصی: ISME30_141
- زبان مقاله: انگلیسی
- تعداد مشاهده: 319
نویسندگان
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol;
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol;
Department of Chemical Engineering, Babol Noshirvani University of Technology, Babol
چکیده
In this study, ۸ samples of thermally activated muscle-like actuators were designed and fabricated by twisting and coiling fishing lines made from nylon threads with diameters of ۰.۵ and ۰.۸ mm. In the first step, the empirical relation of the actuators' final length with their initial yarn length was investigated. Then, to release the residual stresses stored during the twisting procedure, the twisted and coiled actuators were annealed at ۱۲۰°C for ۳ hours. Then the mechanical behavior of prepared actuators was studied via a tensile test. Results showed the stiffness of ۴۱.۷۴۴۶۸ and ۱۶۳.۷۳۱۲۶ (N/m) for yarns with diameters of ۰.۵ mm and ۰.۸ mm respectively. The thermomechanical behavior of the actuators was also investigated with hot water at ۴۰, ۵۰, ۶۰, ۷۰, and ۸۰°C. A roughly linear relation with R۲ of ۰.۹۸۷۸ was found between strain rate percentage and test temperature for the actuator with the diameter of ۰.۵ and a roughly linear relation with R۲ of ۰.۹۹ was found between strain rate percentage and test temperature for the actuator with the diameter of ۰.۸ mm while the actuators were stretched with a load with a weight of ۰.۱۴۵ kg and the maximum strain rate percentage were ۲.۰۲۵۳ and ۶.۱۴۰۳ at ۸۰°C for actuators with diameters of ۰.۵ and ۰.۸ mm respectively.کلیدواژه ها
Actuator, Thermally Activated, Twisted and Coiled, Muscle Like, Fishing Lineمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.