Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 35، شماره: 5
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 155
فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-35-5_022
تاریخ نمایه سازی: 10 اردیبهشت 1401
چکیده مقاله:
A new three stage production-assembly problem is considered in this paper. To the best of our knowledge, considering parallel machines in the third stage, identical parallel factories including the three stage production-assembly system and identical parallel factories with parallel machines in the third stage of the production-assembly system, has been specifically investigated in this paper. To minimize the maximum completion time (Makespan) of all jobs in the all factories, jobs assignment to factories and their processing sequence should be done properly. A Mixed Integer Linear Programming (MILP) model is presented to solve small size problem by using cplex solver. According to the problem computational complexity, large size of problem is not possible to solve using the cplex, so to solve it and to control the computational complexity, a new improved genetic algorithm (GA) is proposed by combining GA and Longest Proseccing Time (LPT) method that is called Hybrid Genetic Algorithm Longest Proseccing Time (HGALPT). The problem parameters values are determined using one-way analysis of variance (ANOVA). Finally, in order to evaluate the efficiency and effectiveness of the proposed algorithm, and to specify each parameter impact on the objective function, sensitivity analysis is performed on the problem parameters.
کلیدواژه ها:
نویسندگان
M. Torkashvand
Department of Industrial Engineering, University of Kurdistan, Sanandaj, Iran
F. Ahmadizar
Department of Industrial Engineering, University of Kurdistan, Sanandaj, Iran
H. Farughi
Department of Industrial Engineering, University of Kurdistan, Sanandaj, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :