Screening Produced Water Disposal Challenges in an Oilfield: Scale Formation and Injectivity Impairment

  • سال انتشار: 1400
  • محل انتشار: فصلنامه علوم و فناوری نفت و گاز، دوره: 10، شماره: 4
  • کد COI اختصاصی: JR_IJOGST-10-4_004
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 173
دانلود فایل این مقاله

نویسندگان

Mehdi Amiri

Ph.D. Petroleum, Department of Petroleum Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran

Jafar Qajar

Assistant Professor,Department of Petroleum Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran

Azim Kalantariasl

Assistant Professor,Department of Petroleum Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran

چکیده

Sarvestan and Saadatabad oilfields produce more than ۱۴۰ bbl/day of wastewater due to oil processing. Due to environmental issues, the produced water is injected into a disposal well through a pipeline with a diameter of ۸ inch and a length of ۵ km. Formation of inorganic scale may accelerate the need for frequent reservoir acid stimulation, restrict flow path, and generally add unpredicted costs for water injection operations. This study predicts scaling tendency and examines scale precipitation at different pressures, temperature, and mixing ratios of injection wastewater with formation water in Sarvestan and Saadatabad oilfields. The experimentally measured chemical analysis of the injection water and formation water was used to estimate the amount, type, and composition of scale due to mixing and changes in thermodynamic conditions. Scaling tendency values for eight types of scale, namely CaCO۳ (calcite), CaSO۴ (anhydrite), CaSO۴.۲H۲O (gypsum), FeCO۳ (siderite), Fe(OH)۲ (amorphous), NaCl (halite), Mg(OH)۲ (pyrochroite), and KCl (sylvite), were investigated by commercial software packages OLI ScaleChem and StimCADE. The results show that the significant scales are CaCO۳ and FeCO۳ formed in Sarvestan and Saadatabad oilfields. The formation of these scales can lead to severe problems, such as disrupting equipment and decreasing production; thus, it is necessary to predict all types of scales before forming. It allows design and planning for chemical inhibitor treatment and prediction of injectivity problems and acid stimulation.

کلیدواژه ها

CaCO۳, FeCO۳, Produced Water, Scaling tendency, Sarvestan and Saadatabad oilfields

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.